I looked at a Samsung refrigerator, Model# RS267LBBP, which was not cooling and found the compressor not running but the display panel showing 0 and 37 degrees. There was only 40v going to the compressor so I replaced the mother board. The compressor kicked on and proceeded to cool the food side but not the freezer side and three warning beeps occurred every 30 seconds. I unplugged the refrigerator to see if the new board needed to be reset and the freezer side cooled but the food side warmed up. Now both sides are not cooling and it is still beeping.
Does this board have to be encoded or is there another issue?