Get Answers to your Appliance Repair Questions

Washer PartsDryer PartsRefrigerator PartsDishwasher PartsRange & Oven PartsAll Appliance Parts

Author Topic: tech sheet  (Read 1195 times)

Offline vunger1

  • Technician
  • Member Since: Sep 2015
  • Posts: 18
  • Country: us
Re: tech sheet
« Reply #10 on: March 07, 2017, 04:20:33 PM »
Okay I had this same unit and I replaced the AdC board as the defrost was building up on the coils very badly .  after replacing the board the defrost system is working as it should , only one problem , now the ice in the ice Ben seems to be melting during defrost mode I am guessing due to an extended defrost mode what could cause this. Is this a possible software issue on the board itself. Or is this most likely related to a thermostat that's not terminating the defrost when it should?
Also does this refrigerator have the ability to still be in defrost mode without needing to run a neutral path through the thermostats?


Kenmore Refrig Tech Sheet

Started by ejarick

Replies: 0
Views: 955
Last post August 27, 2014, 10:16:44 AM
by ejarick
Missing Tech. sheet

Started by nafraz

Replies: 2
Views: 917
Last post July 06, 2015, 07:12:24 PM
by nafraz


Replies: 2
Views: 536
Last post March 04, 2016, 07:27:55 PM
Whirlpool Tech Sheets, Wiring Diagrams & Error Codes

Started by AJ

Replies: 0
Views: 11362
Last post December 11, 2008, 10:20:48 PM
by AJ
Top Ten Whirlpool Service Manuals, Error Fault Codes & Tech Sheets

Started by AJ

Replies: 0
Views: 40908
Last post January 18, 2009, 03:07:23 PM
by AJ
Tech Training in Maryland

Started by ASAP

Replies: 1
Views: 3085
Last post October 27, 2009, 05:19:53 PM
by jumptrout51