Has anyone come up with some new thoughts on this issue below that was posted April 2012 , I am experiencing the same problems with my 110 28002011. Like Redrock all the components that make it fill, drain, spin, and wash are working but it doesnít finish a cycle. Sometimes it will stop and release the door lock, other times it will pause for more than 30 min then start again. It seems that it is confused but after unplugging it seems to be ok through half a cycle. I havenít checked the codes yet, not sure really how to.
The washer times out in drain cycle. Spin light on & door lock off means long drain or long fill?
Fault code shows F9 & E1 which means drain problem. The machine seems to drain all of the water, but can not leave the drain cycle. Unplugging the power for 10 minutes allows any cycle to begin, but the first normal drain cycle will cause long drain time out. To do laundry in NORMAL cycle for example will have the wash water drain, but can not go to rinse. unplug power for 10 minutes and then go to RINSE/DRAIN. Unplug power for another 10 minutes and go to DRAIN/SPIN
and the wash is done. My wife wants a new washer or husband, which ever can do laundry.