The compressor is a FC75Lane.
I have not plugged the unit in for a while since the day I hot wired the compressor to 110v, ran it for a min or so, then put it all back and it was still just clicking repeatedly and flashing the led on the board.
Today after reading the manual tgoods was so kind to provide I plugged it in and no clicking at all but compressor will not run, so I put unit into test mode by pressing the button on the main board once, which is supposed to run all fans and the compressor.
Everything runs except the compressor, PWB board does not click at all and no led activity.
The part is showing out of stock on both sites repairclinic and appliancepartspros and a few other sites I tried so I assume this is a common failure item and maybe just a coincidence and the flood water has nothing to do with it?
It did run fine when I first cleaned the board with wd-40 after the hurricane.
Anyone else replace that board before for same symptoms?
P/N is ABQ73004302