365-Day Hassle Free Return Policy!  ·  AppliancePartsPros.com
Washer PartsDryer PartsRefrigerator PartsDishwasher PartsRange & Oven PartsAll Appliance Parts

Author Topic: GE profile PSHS6TGXBDSS dispenser and temp display dead.  (Read 727 times)

Offline Bill

  • Technician
  • Member Since: May 2008
  • Posts: 55
GE profile PSHS6TGXBDSS dispenser and temp display dead.
« on: September 27, 2013, 12:02:56 AM »
I can not find a service manual for this unit. The customer says his daughter was trying to get ice out of dispenser when the dispenser jammed up. She forced the ice out of the unit but now the temp and dispenser controls are dead. I tried to check voltage out of the main control board on Pin 4 J1 to J2 but got 0 A/C volts. Pin 1 to Pin 3 and Pin 2 to Pin 3 read 48 vac. I thought the main control board was bad and ordered and replaced the main board but display and dispenser are still dead. I am now thing that Dispenser interface board WR55X10776 is bad but I also see that their is a display lighting board WR55X10889. Don't want to order another wrong part so any assistance will be greatly appreciated. I should also say that the refrig seems to be working fine just not the dispenser and temp display. I have the tech sheet but it is not of much use since it does not tell you what voltages to expect.

Offline Cananot

  • Technician
  • Member Since: May 2013
  • Posts: 116
  • Country: us
  • Technician for 13 years and still getting stumped
    • Buy me a beer through paypal
Re: GE profile PSHS6TGXBDSS dispenser and temp display dead.
« Reply #1 on: September 27, 2013, 07:17:11 AM »
Been there done that..replace the  dispensor board 


Frigidaire SxS fridge model #GLHS36EFSB0,the temp setting showed "o"&"F" & dead

Started by shillion

Replies: 3
Views: 2027
Last post January 29, 2012, 09:00:49 PM
by shillion
Chest Freezer Digital Internal Temp Display

Started by fixitgal1

Replies: 0
Views: 710
Last post July 29, 2014, 06:10:23 PM
by fixitgal1
GE Profile PFSS6PKWBSS - power outage - display says "88" and "8e"

Started by heelzeal1

Replies: 2
Views: 402
Last post February 28, 2015, 11:24:16 PM
by AJ
Need help getting to the diagnostics display GE Profile PFSS6PKXASS

Started by mcheney

Replies: 3
Views: 252
Last post August 02, 2015, 08:55:39 PM
by mcheney
Kenmore refrigerator - how remove ice/water dispenser front panel

Started by Marvster

Replies: 1
Views: 29428
Last post August 11, 2007, 08:06:07 PM
by AJ
No water from dispenser-ice maker working-replaced valve inlet

Started by Evan

Replies: 2
Views: 5454
Last post August 18, 2007, 05:17:53 PM
by Evan