Author Topic: GE profile PSHS6TGXBDSS dispenser and temp display dead.  (Read 417 times)

Offline Bill

  • Technician
  • Member Since: May 2008
  • Posts: 49
GE profile PSHS6TGXBDSS dispenser and temp display dead.
« on: September 27, 2013, 12:02:56 AM »
I can not find a service manual for this unit. The customer says his daughter was trying to get ice out of dispenser when the dispenser jammed up. She forced the ice out of the unit but now the temp and dispenser controls are dead. I tried to check voltage out of the main control board on Pin 4 J1 to J2 but got 0 A/C volts. Pin 1 to Pin 3 and Pin 2 to Pin 3 read 48 vac. I thought the main control board was bad and ordered and replaced the main board but display and dispenser are still dead. I am now thing that Dispenser interface board WR55X10776 is bad but I also see that their is a display lighting board WR55X10889. Don't want to order another wrong part so any assistance will be greatly appreciated. I should also say that the refrig seems to be working fine just not the dispenser and temp display. I have the tech sheet but it is not of much use since it does not tell you what voltages to expect.

Offline Cananot

  • Technician
  • Member Since: May 2013
  • Posts: 116
  • Country: us
  • Technician for 13 years and still getting stumped
    • Buy me a beer through paypal
Re: GE profile PSHS6TGXBDSS dispenser and temp display dead.
« Reply #1 on: September 27, 2013, 07:17:11 AM »
Been there done that..replace the  dispensor board 

 

Frigidaire SxS fridge model #GLHS36EFSB0,the temp setting showed "o"&"F" & dead

Started by shillion

Replies: 3
Views: 1472
Last post January 29, 2012, 09:00:49 PM
by shillion
Chest Freezer Digital Internal Temp Display

Started by fixitgal1

Replies: 0
Views: 350
Last post July 29, 2014, 06:10:23 PM
by fixitgal1
Kenmore refrigerator - how remove ice/water dispenser front panel

Started by Marvster

Replies: 1
Views: 23910
Last post August 11, 2007, 08:06:07 PM
by AJ
No water from dispenser-ice maker working-replaced valve inlet

Started by Evan

Replies: 2
Views: 3629
Last post August 18, 2007, 05:17:53 PM
by Evan
kenmore ice dispenser

Started by brad

Replies: 4
Views: 3349
Last post September 15, 2007, 05:09:18 AM
by brad
Ice Dispenser motor access

Started by bbird

Replies: 6
Views: 6327
Last post September 27, 2007, 01:41:05 PM
by bbird