Author Topic: maytag washer cabrio f51  (Read 301 times)

Offline stanman

  • VIP Member
  • Member Since: Sep 2013
  • Posts: 1
maytag washer cabrio f51
« on: September 24, 2013, 09:11:48 PM »
Maytag washer gives f51 code.Remove tub a couple of socks found.Still shows f51.,Washer works fine with no clothes in it.I am wondering if its the rotor.Its a Cabrio built,Any ideas?

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 947
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: maytag washer cabrio f51
« Reply #1 on: September 25, 2013, 06:25:58 AM »
Do you have a model number? Sounds more like the rps sensor.

Sent from my MB865 using Tapatalk 2


Offline afterblast

  • Technician
  • Member Since: Feb 2013
  • Posts: 55
  • Country: us
Re: maytag washer cabrio f51
« Reply #2 on: September 25, 2013, 07:05:44 PM »
does it give you the error right away at the beginning of the cycle? or does it wait till it starts trying to agitate?..  run into a few of these that were giving the error on agitate due to the rotor being loose on the drive shaft...  when it tried to agitate it wobbled and the rps sensor couldn't make good sense of it..


if it's doing it right away then I'd look at the rps sensor itself.

in the front left of the washer cabinet near the top their should be a packet that has the tech information for your washer.... it should have the specific steps for checking the rps sensor with a meter..


 

Maytag Neptune washer MAH4000AWW

Started by Sue

Replies: 8
Views: 5245
Last post February 09, 2013, 07:41:01 AM
by def
Video: Old Maytag Gas Washer

Started by AJ

Replies: 2
Views: 2731
Last post September 04, 2007, 10:34:57 PM
by AJ
Maytag Washer Bearing Repalcement MLG2000AWW

Started by davidpgh1

Replies: 8
Views: 8301
Last post January 06, 2008, 01:59:10 PM
by inot66
Maytag LAT8704AAE Washer Leak

Started by endresrk

Replies: 3
Views: 4207
Last post August 28, 2007, 08:11:12 PM
by AJ
How to replace a Maytag - Amana washer water pump and belt.

Started by AJ

Replies: 18
Views: 25055
Last post April 19, 2010, 08:23:29 PM
by JWWebster
How old is my Maytag washer?

Started by jon

Replies: 1
Views: 16029
Last post September 03, 2007, 12:42:08 PM
by AJ