Author Topic: Whirlpool GSF26C5EXY00 frig will not dispense ice  (Read 706 times)

Offline Cananot

  • Technician
  • Member Since: May 2013
  • Posts: 116
  • Country: us
  • Technician for 13 years and still getting stumped
    • Buy me a beer through paypal
Whirlpool GSF26C5EXY00 frig will not dispense ice
« on: August 29, 2013, 10:08:32 AM »
Alright I have a whirlpool frig that wont dispense ice the auger motor wont turn making ice no problem but wont dispense flap door opens but that's it so I replaced auger motor and still the same problem I'm suppose to get 140vdc to the motor but I'm not getting like 78.6 and .22 when not in use sooo is that the main board or the display board causing it not to work??? Now its on the main board I'm pretty sure cause P13 is the motor plug and I assume I should be getting 120 from that point just don't know if it gives to the display board then to the motor don't have a wire tech sheet on it .??anyone have any ideas ???

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1521
  • Country: us
    • Buy me a beer through paypal
Re: Whirlpool GSF26C5EXY00 frig will not dispense ice
« Reply #1 on: August 29, 2013, 10:20:04 AM »
I've attached the tech sheet.

Offline Cananot

  • Technician
  • Member Since: May 2013
  • Posts: 116
  • Country: us
  • Technician for 13 years and still getting stumped
    • Buy me a beer through paypal
Re: Whirlpool GSF26C5EXY00 frig will not dispense ice
« Reply #2 on: August 29, 2013, 12:42:26 PM »
Thanks tgood but according to that sheet I'm suppose to get 140vdc so I was right there but from power board only getting 14.6 to p13-1 plug so that's right again going by that sheet but to the motor only getting 6.8 and then press the button and it jumps to as high as 56.7 its a 120 7amp motor now how the heck is that gonna push that motor ?????right it don't so how can the sheet be right and wrong ..I'm scratching my head here fellows and what am I missing ??? It worked before now replace motor and nothing just like it was before replacing motor.?????? Now e display works I tried and everything is working but wont turn auger motor ?i need some help here let's throw some ideas at me

 

Whirlpool Refrigerator Model GI7FVCXWY01 frig not cooling.

Started by ranway

Replies: 7
Views: 4323
Last post September 12, 2011, 09:30:44 PM
by ranway
R-101 Whirlpool Refrigerator Fast Fill Dispense System Service Manual

Started by AJ

Replies: 0
Views: 2375
Last post August 20, 2009, 01:06:53 PM
by AJ
cubes vs. crushed ice. whirlpool frig # gs6shexnb01

Started by repairguy42

Replies: 5
Views: 1796
Last post October 03, 2011, 08:03:39 PM
by krazytech
whirlpool frig see below

Started by repairguy42

Replies: 1
Views: 905
Last post October 04, 2011, 05:41:13 PM
by AJ
whirlpool frig wont defrost

Started by ohboy

Replies: 15
Views: 3776
Last post March 04, 2012, 06:56:32 PM
by JWWebster
Whirlpool Frig need schematic

Started by apu

Replies: 6
Views: 1764
Last post June 05, 2012, 08:40:17 PM
by AJ