Author Topic: Hoshizaki model KML-400 MWE  (Read 351 times)

Offline dentdaddy

  • Technician
  • Member Since: Feb 2010
  • Posts: 171
  • Country: us
Hoshizaki model KML-400 MWE
« on: August 27, 2013, 08:36:21 AM »
I am working on an icemaker that needs a float. The unit also needs to be cleaned with IM cleaner. There are 2 switches, one is labeled "Service - Off - Ice" the other is "Circulate - (possibly says Run?)". I don't know exactly what to set this machine on in order to make it run a cleaning cycle. How long do you let it run when you add the cleaner and how much cleaner do I need to put in? Anyone have a manual or any advise on this machine or similar models? They have 3 machines and I want to get them enough cleaner for all of them.




This is for a new hotel client for us and I need to make a good impression.


Thanks in advance for any and all help.
Good work isn't cheap. Cheap work isn't good.
SW Oklahoma

Offline krazytech

  • Technician
  • Member Since: Sep 2007
  • Posts: 705
  • Country: us
    • Buy me a beer through paypal
Re: Hoshizaki model KML-400 MWE
« Reply #1 on: August 27, 2013, 02:25:08 PM »



I have the S?M for this model PM me or I can send too AP




1. HOSHIZAKI recommends cleaning this unit at least once a year. More
frequent cleaning, however, may be required in some existing water
conditions.
2. To prevent injury to individuals and damage to the icemaker, do not use
ammonia type cleaners.
3. Always wear liquid-proof gloves for safe handling of the cleaning and
sanitizing solution. This will prevent irritation in case the solution contacts
with skin.
1) Dilute approximately 10.5 fl. oz. of recommended cleaner Hoshizaki “Scale Away” or
“LIME-A-WAY,” (Economics Laboratory, Inc.) with 2 gal. of water.
2) Remove all ice from the Evaporator and the Storage Bin.
Note: To remove cubes on the Evaporator, turn off the power supply and turn it on
after 3 minutes. The defrost cycle starts and the cubes will be removed from
the Evaporator.
3) Turn off the power supply.
4) Remove the Front Panel.
5) Place the Control Switch in the “SERVICE” position. Then place the Service Switch
in the “DRAIN” position.
6) Replace the Front Panel and turn on the power supply for 2 minutes.
7) Turn off the power supply.
8) Remove the Front Panel and then remove the Insulation Panel by lifting up the panel
 slightly and pulling it toward you.
9) Pour the cleaning solution into the Water Tank.
10) Move the Service Switch to the “WASH” position.
11) Replace the Insulation Panel and the Front Panel in their correct positions.
12) Turn on the power supply and start the washing process.
13) Turn off the power supply after 30 minutes.
14) Remove the Front Panel.
15) Move the Service Switch to the “DRAIN” position.
16) Replace the Front Panel and turn on the power supply for 2 minutes.
17) Turn off the power supply and remove the Front Panel.
18) Move the Control Switch to the “ICE” position.
19) Replace the Front Panel in its correct position.
20) Turn on the power supply to fill the Water Tank with water.
21) Turn off the power supply after 3 minutes.
22) Remove the Front Panel.
23) Move the Control Switch to the “SERVICE” position; then move the Service Switch
 to the “WASH” position
24) Replace the Front Panel in its correct position.
25) Turn on the power supply to rinse off the cleaning solution.
26) After 5 minutes, turn off the power supply.
27) Remove the Front Panel.
28) Move the Service Switch to the “DRAIN” position.
29) Replace the Front Panel and turn on the power supply for 2 minutes.
30) Turn off the power supply.
31) Remove the Front Panel.
31) Repeat the above steps 18) through 31) three more times to rinse thoroughly.
Note: If you do not sanitize the icemaker, go to step 14) in “SANITIZING
Check the Basics first!!! Read the Manual !!!Buy the tech a Beer!!!

Offline dentdaddy

  • Technician
  • Member Since: Feb 2010
  • Posts: 171
  • Country: us
Re: Hoshizaki model KML-400 MWE
« Reply #2 on: August 27, 2013, 03:16:22 PM »
OUTSTANDING SIR! A million thanks to you!
Good work isn't cheap. Cheap work isn't good.
SW Oklahoma

 

kenmore refrigerator model # 52552100 no ice

Started by davelita

Replies: 6
Views: 10686
Last post August 04, 2007, 03:24:08 PM
by AJ
Kenmore model # 106.5229910 no ice

Started by happyeverafter

Replies: 5
Views: 5970
Last post August 06, 2007, 06:55:06 AM
by AJ
Kenmore SxS Model 106.56563400 Ice Maker Problems

Started by Kman

Replies: 4
Views: 6405
Last post September 07, 2007, 12:45:10 PM
by Pegi
Roper refrigerator Model RT18AKXKQ05 with water dripping into frig

Started by ecurb13

Replies: 5
Views: 7307
Last post December 30, 2007, 12:22:09 AM
by AJ
Side by Side Refrigerator - Model: frs6r5embf

Started by Savage702

Replies: 1
Views: 1928
Last post June 06, 2012, 04:08:13 PM
by AJ
Buying a new refrigerator - looking at LG French door model ?

Started by rkpatt

Replies: 1
Views: 1521
Last post August 07, 2008, 06:40:51 PM
by AJ