Author Topic: E91 error Electrolux IQ EIFLW50LIW washer.(i already replaced boards) :(  (Read 792 times)

Offline Alpaycan

  • VIP Member
  • Member Since: Jul 2011
  • Posts: 2
Hi,  I have April 2013 purchased Electrolux IQ EIFLW50LIW washer. i have relocated to Europe and brought the washer with other stuff with me. I am using appropriate converters for each appliance with correct wattage and voltage. I have 2000Watts 110V SIMRAN voltage converter for this washer. I plugged it in as soon as i got it and got E91 error code .( all other electronics and appliances are working fine, except this washer)


 Based on the descriptions either the UI or main board not good or not communicating with each other. I checked the wires then i ordered two of the boards, AP5628677 and AP5628390 . i received them last week and replaced them right away. getting the same error code E91.  i check the connectivity on each cable connected to Main Board and 6 color coded wires going to UI Board. I cleaned connectors too. but did not help. So what i need to know is where else i should look at, what should I check..


please let me know at your earliest , i have no idea what to do now with this brand new washer that does not function 5000 miles away of home. Thanks,.
( I already called local Electrolux Service, they could not even located this model number under their scope..   :'( )

Offline LowSL2

  • Technician
  • Member Since: Dec 2011
  • Posts: 827
  • Country: us
  • Fletch F. Fletch
    • Buy me a beer through paypal
You can get this error with a faulty motor control as well. Check all connections going to the motor control. If all connections are good and tight, it could be bad.

Sent from my DROID BIONIC using Tapatalk 2

LowSL2
15 Years of Professional Appliance Repair Experience

Offline Alpaycan

  • VIP Member
  • Member Since: Jul 2011
  • Posts: 2
Thank you LowSL2 for quick response,
[/size]do you have the diagram or where can I find the motor control card connections. Thanks

 

Electrolux Front Load Washer Error EHE

Started by boyax

Replies: 4
Views: 2598
Last post March 30, 2011, 08:29:12 AM
by boyax
Whirlpool Duet Washer - F-30 error code and clunking noise in detergent area.

Started by AJ

Replies: 3
Views: 13692
Last post November 15, 2009, 09:34:58 AM
by AJ
Kitchenaid Washer F11 Error Code

Started by TechnicianBrian

Replies: 0
Views: 5258
Last post March 23, 2008, 07:06:27 AM
by TechnicianBrian
Maytag Washer F01 Error Code

Started by TechnicianBrian

Replies: 0
Views: 7726
Last post June 17, 2008, 07:13:27 AM
by TechnicianBrian
Frigidaire Washer Long Fill and E10 Error

Started by TechnicianBrian

Replies: 6
Views: 9808
Last post June 26, 2008, 06:28:38 PM
by TechnicianBrian
LG Front Load Washer LE Error code

Started by TechnicianBrian

Replies: 43
Views: 101346
Last post March 12, 2012, 08:01:50 AM
by roodog