Author Topic: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip  (Read 6338 times)

Offline Larry the applia

  • Technician
  • Member Since: Jun 2010
  • Posts: 136
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #10 on: August 12, 2013, 09:31:43 PM »
Just keep track of the bits not easy to replace if loose one. Also the bit holder is the 1/4" driver sometimes they flare out and you can not flip the tips around into the handle.

Offline jason1979g

  • Technician
  • Member Since: Jul 2013
  • Posts: 179
  • Country: us
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #11 on: August 22, 2013, 06:37:03 PM »
Good to hear, I just checked the amazon page I ordered mine from and it states, "Made in USA".

Have tried cheaper ones in the past from local hardware stores and through I liked the idea of the tool they just have not held up for me for very long.

Did you get this yet?

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9602
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #12 on: August 22, 2013, 07:20:12 PM »
Yes and it's much better quality then any other version I have ever tried.
It has a bit of weight to it. Feels good in the hand. The shaft and metal sleeves don't feel tinny and cheap.



and much to my surprise the bits snap into my gear wrench perfectly too!



Hope you find our website helpful.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9602
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #13 on: August 22, 2013, 07:27:37 PM »
A few more snap shots...





Hope you find our website helpful.

Offline jason1979g

  • Technician
  • Member Since: Jul 2013
  • Posts: 179
  • Country: us
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #14 on: August 23, 2013, 08:55:16 AM »
I may have to add one to my arsenal now!

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1349
  • Country: us
    • Buy me a beer through paypal
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #15 on: August 23, 2013, 09:25:38 PM »
I have a Klein 6in 1 stubby but I prefer my "auto loader " screwdriver as it is faster to change bits.http://www.sears.com/search=craftsman%20autoloading%20multi%20bit%20screwdriver?levels=Tools_Hand+Tools&autoRedirect=true I removed the bits and use square drive and others. Would not give up my Klein magnetic nut drivers for anything.

Offline Wedgeman55

  • Technician
  • Member Since: Aug 2008
  • Posts: 978
  • Country: us
  • Man vs Appliance - Never give up, Never surrender
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #16 on: September 20, 2013, 09:29:31 PM »
I have 2 of those Kleins - Had for at least 4 or 5 years.   Electrical supply house right by my house sells Klein tools.    I also have Klein wire cutters,  strippers,  and severl other tools by them.    I keep one of those by my dash along with a small set of channel olcks,  Needle nose and flashlight.      I usually walk into a call with these in my pocket to check out a machine.     The other tools are in my box.   NO sense lugging a heavy toolbox in all the time.   
Commercial Laundry repair Tech and Installer  1973 to 1980
Service Manager / Technician Commercial Laundry repair company 1980 to 2002
Refrigeration - HVAC - Boiler School 1974-1976
Electronic School 1978-1979
Self Employed Appliance Repair Company 2002 to present

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9602
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #17 on: September 20, 2013, 10:06:30 PM »
I'm really liking this 11n1 screwdriver. At first thought I may miss not having magnets on the nut drivers, but I don't anymore.
Wish they made a belt holster for the thing.
Hope you find our website helpful.

Offline olyteddy

  • Technician
  • Member Since: Jul 2012
  • Posts: 194
  • Country: us
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #18 on: October 17, 2013, 10:49:29 PM »
I just wish the short double end bits were available separately. I also wish the Torx was T20 & T25 instead of T10 & T15. I do a lot of GE stuff and the 10-15 is too small.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9602
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Hope you find our website helpful.

 

CORDLESS TOOLS

Started by chic

Replies: 19
Views: 6234
Last post October 11, 2013, 09:12:26 AM
by nolazach
Couple of old tools

Started by AJ

Replies: 0
Views: 2815
Last post May 25, 2008, 07:08:18 PM
by AJ
Appliance Repair Tools

Started by AJ

Replies: 0
Views: 31370
Last post July 25, 2008, 12:07:05 PM
by AJ
tools

Started by diyguy

Replies: 3
Views: 3008
Last post January 21, 2009, 07:31:36 AM
by Mr. Fix-It
Craftsman tools?

Started by cal

Replies: 15
Views: 6582
Last post September 20, 2013, 09:58:38 PM
by Wedgeman55
TOOLS

Started by MajorApp

Replies: 7
Views: 2825
Last post January 24, 2013, 09:17:17 PM
by Wedgeman55