Author Topic: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip  (Read 5561 times)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Ordered one of these after seeing another tech using one. Will let you know what I think of it after I get it and use it for awhile.

This driver contains 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, no.1 and no.2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 torx and no.1 and no.2 square recess...

Anyone else have one or ever used one?

Offline domain

  • Technician
  • Member Since: Nov 2012
  • Posts: 891
  • Country: us
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #1 on: August 11, 2013, 12:54:30 PM »
I carry one. IMHO, geared more towards HVAC since I do a lot of korean work.... O0

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #2 on: August 11, 2013, 12:55:17 PM »
korean work?

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #3 on: August 11, 2013, 12:57:26 PM »
I carry one. IMHO, geared more towards HVAC since I do a lot of korean work.... O0

Is the quality of the tool any better then the cheap ones you see at local hardware stores?

Offline domain

  • Technician
  • Member Since: Nov 2012
  • Posts: 891
  • Country: us
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #4 on: August 11, 2013, 12:58:44 PM »
Much better quality, mine is USA but 3 years old.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #5 on: August 11, 2013, 01:01:38 PM »
Good to hear, I just checked the amazon page I ordered mine from and it states, "Made in USA".

Have tried cheaper ones in the past from local hardware stores and through I liked the idea of the tool they just have not held up for me for very long.

Offline RAH52

  • Technician
  • Member Since: Aug 2008
  • Posts: 700
  • Country: ca
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #6 on: August 11, 2013, 04:59:13 PM »
This is the handiest most used tool in my tool bag

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1322
  • Country: us
    • Buy me a beer through paypal
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #7 on: August 11, 2013, 05:23:04 PM »
I have the stubby Klein, has flat and phillips 1/4 and 5/16 as well as 2 size square drive.

Offline Bailey

  • Technician
  • Member Since: Dec 2011
  • Posts: 650
  • Country: us
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #8 on: August 11, 2013, 08:31:16 PM »
I have that same Megapro screwdriver. Have had it for about 5 years. Best one I ever used.

Offline AdirondackBob

  • Technician
  • Member Since: Oct 2010
  • Posts: 76
  • Country: us
    • North Country Appliance Repair
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #9 on: August 11, 2013, 10:03:45 PM »
AJ, With that Klein 11-1 and the Leatherman, a man can fix a lot of things!

Offline Larry the applia

  • Technician
  • Member Since: Jun 2010
  • Posts: 132
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #10 on: August 12, 2013, 09:31:43 PM »
Just keep track of the bits not easy to replace if loose one. Also the bit holder is the 1/4" driver sometimes they flare out and you can not flip the tips around into the handle.

Offline jason1979g

  • Technician
  • Member Since: Jul 2013
  • Posts: 174
  • Country: us
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #11 on: August 22, 2013, 06:37:03 PM »
Good to hear, I just checked the amazon page I ordered mine from and it states, "Made in USA".

Have tried cheaper ones in the past from local hardware stores and through I liked the idea of the tool they just have not held up for me for very long.

Did you get this yet?

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #12 on: August 22, 2013, 07:20:12 PM »
Yes and it's much better quality then any other version I have ever tried.
It has a bit of weight to it. Feels good in the hand. The shaft and metal sleeves don't feel tinny and cheap.



and much to my surprise the bits snap into my gear wrench perfectly too!




Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #13 on: August 22, 2013, 07:27:37 PM »
A few more snap shots...






Offline jason1979g

  • Technician
  • Member Since: Jul 2013
  • Posts: 174
  • Country: us
Re: Klein Tools 32500 11-in-1 Screwdriver/Nut Driver with Cushion Grip
« Reply #14 on: August 23, 2013, 08:55:16 AM »
I may have to add one to my arsenal now!

 

CORDLESS TOOLS

Started by chic

Replies: 19
Views: 5455
Last post October 11, 2013, 09:12:26 AM
by nolazach
Couple of old tools

Started by AJ

Replies: 0
Views: 2552
Last post May 25, 2008, 07:08:18 PM
by AJ
Appliance Repair Tools

Started by AJ

Replies: 0
Views: 30832
Last post July 25, 2008, 12:07:05 PM
by AJ
tools

Started by diyguy

Replies: 3
Views: 2722
Last post January 21, 2009, 07:31:36 AM
by Mr. Fix-It
Craftsman tools?

Started by cal

Replies: 15
Views: 5890
Last post September 20, 2013, 09:58:38 PM
by Wedgeman55
TOOLS

Started by MajorApp

Replies: 7
Views: 2412
Last post January 24, 2013, 09:17:17 PM
by Wedgeman55