Author Topic: Issue reassembling a Kenmore 90 Series  (Read 605 times)

Offline Tim Buchinger

  • VIP Member
  • Member Since: Aug 2013
  • Posts: 3
Issue reassembling a Kenmore 90 Series
« on: August 09, 2013, 02:32:24 PM »
I have a Kenmore 90 series that I had to replace the clutch on. The replacement of the clutch went well however I found this pin lying on the ground under the machine when I went to put everything back together and I cannot for the life of me figure out where it goes! I should have taken a picture with a tape measure beside it to better illustrate the size but its probably about 2-3 inches in length.

Any ideas?

http://s7.postimg.org/h0p8yrm9n/Washer_Pin.jpg

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 1504
  • Country: us
Re: Issue reassembling a Kenmore 90 Series
« Reply #1 on: August 09, 2013, 02:59:11 PM »
Thats a shipping pin.You don,t need it.

Offline Tim Buchinger

  • VIP Member
  • Member Since: Aug 2013
  • Posts: 3
Re: Issue reassembling a Kenmore 90 Series
« Reply #2 on: August 09, 2013, 03:27:55 PM »
Well that makes me feel a lot better, thank you very much for the help.

Offline AppTek

  • Technician
  • Member Since: May 2012
  • Posts: 59
  • Country: ca
Re: Issue reassembling a Kenmore 90 Series
« Reply #3 on: August 09, 2013, 04:35:33 PM »
I know a mechanic that found those pins and welded them in place lol. He didn't know why the washer shook so bad when he was done... :rofl:  :oops:

 

Kenmore 80 Series Washer

Started by shawnrconnelly

Replies: 5
Views: 5660
Last post October 25, 2007, 09:46:52 AM
by Pegi
Kenmore 90 Series - No agitation

Started by jastek

Replies: 24
Views: 9542
Last post February 23, 2008, 06:18:42 AM
by whirlpooltech
KENMORE WASHER 60 series

Started by amnesty

Replies: 7
Views: 13589
Last post March 06, 2008, 02:48:23 PM
by JWWebster
kenmore 80 series washer

Started by buddyray

Replies: 2
Views: 6445
Last post April 19, 2008, 06:01:05 PM
by RegUS_PatOff
Kenmore Series 80 coupling repair

Started by DFOK

Replies: 4
Views: 4216
Last post April 25, 2008, 07:21:30 PM
by JWWebster
Kenmore 80 series washer

Started by KenOH98

Replies: 16
Views: 24305
Last post January 01, 2009, 09:28:08 PM
by bal62958