Author Topic: Inglis dryer dead  (Read 1035 times)

Offline papitohead

  • VIP Member
  • Member Since: Jul 2013
  • Posts: 4
Inglis dryer dead
« on: July 22, 2013, 10:24:19 AM »
There is power, sensor has continuity door and push button works when tested. Dryer will not do anything.

Offline papitohead

  • VIP Member
  • Member Since: Jul 2013
  • Posts: 4
Re: Inglis dryer dead
« Reply #1 on: July 22, 2013, 02:06:50 PM »
To make it more clear, it is an Inglis Whirlpool dryer and the only P/N I can find is behind the control panel and is W10207807.
There is power to it. I checked the continuity on the door switch and the push start button and both have continuity. When I opened it was pretty dirty. I cleaned everything and still wont start. I check continuity on the fuse that sits on the cover of the fan and it also has continuity.

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 1490
  • Country: us
Re: Inglis dryer dead
« Reply #2 on: July 22, 2013, 03:16:10 PM »
Post your model number you might get more help.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Inglis dryer dead
« Reply #3 on: July 23, 2013, 08:22:04 AM »
Is the filter in the top or inside the door? if the filter is in top the fuse is located on the filter housing in the rear. Remove the housing and clean it out if that is the case. probably full of lint.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline papitohead

  • VIP Member
  • Member Since: Jul 2013
  • Posts: 4
Re: Inglis dryer dead
« Reply #4 on: July 23, 2013, 11:16:54 AM »
Thank you for your reply. It is a top filter unit. I did take the thermal fuse out and checked continuity and is OK. Yes. it was pretty dirty but since, I have cleaned it all very thorough.

I can not find a model on the unit, neither on the instruction and installation booklets. All I can find is that is a Heavy duty Super Capacity 5 Cycle 3 Temperature and was probably manufactured on Oct 14, 2009 which is what says on top of control panel.

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1318
  • Country: us
    • Buy me a beer through paypal
Re: Inglis dryer dead
« Reply #5 on: July 23, 2013, 08:47:03 PM »
Inside the door on a white sticker.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Inglis dryer dead
« Reply #6 on: July 23, 2013, 09:51:21 PM »
Redneck way to check a dryer motor:
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline papitohead

  • VIP Member
  • Member Since: Jul 2013
  • Posts: 4
Re: Inglis dryer dead
« Reply #7 on: July 25, 2013, 11:17:01 AM »
Ok,, opened the front door and found the following information:

MOD lED4400VQ1
TYPE: DWJR-ELE-2406026-FM54
SER MY4325707

I also checked and have 120 VAC before and after the white thermal fuse located on the fan housing.

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 1490
  • Country: us
Re: Inglis dryer dead
« Reply #8 on: July 25, 2013, 04:56:27 PM »
Customer call me in april same model electric IED4400VQ1.Dead.Check power to back of dryer 240 volts ,120 volts to neutral on both legs and then thought easy thermal fuse but know.Turn out to be timer.I had wiring diagram at time and found what terminals to jump and got dryer to run.Then knew timer was bad.Timer said made in china and then took it apart as i knew then it was a order part.Could not find any burt contacts or anything that i could see wrong.But i can tell you it was the cheapest timer i ever saw.Next day install timer off she went.I bet you have bad timer i don't reminder what wires i jump out.Price was not cheap .

 

IA84600 Inglis dryer doesn't heat

Started by RickT

Replies: 5
Views: 7840
Last post January 16, 2008, 04:02:42 PM
by JWWebster
Frigidaire Electric Dryer - Dead

Started by AJ

Replies: 4
Views: 4001
Last post August 17, 2009, 08:45:14 PM
by BrntToast
my maytag dependable care dryer is dead?

Started by maylene1852

Replies: 5
Views: 3987
Last post February 10, 2008, 09:29:47 PM
by theoldstoveguy
IA76702 Inglis Dryer Burnt Smell

Started by tvdm

Replies: 4
Views: 3349
Last post August 06, 2008, 04:56:43 PM
by tvdm
TD33 ASKO Clothes Dryer TD33, dead after power surge, is there a fuse?

Started by kidsteele

Replies: 2
Views: 2350
Last post March 18, 2009, 07:15:44 PM
by jumptrout51
Performa Dryer Dead Will Not do anything

Started by Jaytag

Replies: 2
Views: 1534
Last post February 20, 2009, 10:48:35 AM
by JWWebster