Author Topic: GE GSD6260J10SS not sensing temp  (Read 435 times)

Offline kelleym1

  • VIP Member
  • Member Since: Jul 2013
  • Posts: 1
GE GSD6260J10SS not sensing temp
« on: July 12, 2013, 06:30:23 AM »
Multiple problems. I am not getting any heat from the heating element. The Element checks to have continuity. The wash cycles seem to be long. The water level does not reach the heating element. However, Needless to say the wash is not good, I have cleaned the inlet valve. When I run it in the anti bacteria mode, it starts right off. There does not seem to be any sensing cycle.

 

Frigidair Gallery GLD2250RDC3 flashes hi temp and no heat lights

Started by Supermag

Replies: 1
Views: 1210
Last post January 09, 2012, 09:52:42 PM
by whirlpooltech