Author Topic: utica boiler 35 psi  (Read 1954 times)

Offline 4uzindian

  • VIP Member
  • Member Since: Sep 2009
  • Posts: 37
utica boiler 35 psi
« on: September 28, 2013, 02:53:32 PM »
1989 utica boiler.new expansion tank . new watts inlet pressure valv serial # 1330 /number 1156F / no model number stamped on id plate.boiler pressure at 35 psi. the tech said it is ok .when origanaly installed in 1989 tech said it should't be over 20 psi.it works it heats .but slight hum in return pipes.wrapped towels around these .quited the sound.the old valve was adjustable new one is not.is this to much pressure? is this ok?

 

1989 utica boiler model dv

Started by 4uzindian

Replies: 1
Views: 2105
Last post November 08, 2013, 07:48:10 AM
by Gasman55