Author Topic: Older Maytag Commercial Coin-op Stopping at Rinse Cycle.  (Read 919 times)

Offline leonleoj

  • VIP Member
  • Member Since: Jul 2013
  • Posts: 2
I have a problem with a Maytag Commercial Coin-op Washer.  Model # AC23CS Series 04

If you put the coins in and activate the washer, everything is normal and the 'Machine in Use' indicator light is on.  Then after the agitating is done and all the water is drained from the tub, the 'Machine in Use' indicator light is still on and as soon as the indicator light 'Rinse' comes on the machine stops.  It just sits there with the two indicator lights on and does nothing.  Then if you put coins in again, it will start-up at the rinse cycle and complete the rinse cycle and the machine will stop like it just completed normally.

I thought it was the timer, so I put a new timer in and the same thing happens.  ???

Any thoughts of what the problem may be?

Thanks.

Offline Bailey

  • Technician
  • Member Since: Dec 2011
  • Posts: 636
  • Country: us
Re: Older Maytag Commercial Coin-op Stopping at Rinse Cycle.
« Reply #1 on: July 05, 2013, 09:53:46 AM »
I couldn't get the model number to work on the parts lookup.

Offline leonleoj

  • VIP Member
  • Member Since: Jul 2013
  • Posts: 2
Re: Older Maytag Commercial Coin-op Stopping at Rinse Cycle.
« Reply #2 on: July 05, 2013, 10:12:17 AM »
Sorry about that, I just rechecked it and the correct model number is A23CS Series 04

Offline Bailey

  • Technician
  • Member Since: Dec 2011
  • Posts: 636
  • Country: us
Re: Older Maytag Commercial Coin-op Stopping at Rinse Cycle.
« Reply #3 on: July 06, 2013, 09:12:39 AM »
What I don't get ,is why putting coins in at the rinse will start it again. Heres why. That spring loaded arm on the timer sticks up at the start of the cycle so the coin slot can slip past it than catch it and pull it forward to start the cycle.By the time the rinse cycle starts that arm is down at the bottom of the timer and nowhere near the coin slot.

Online theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1282
  • Country: us
    • Buy me a beer through paypal
Re: Older Maytag Commercial Coin-op Stopping at Rinse Cycle.
« Reply #4 on: July 06, 2013, 02:40:29 PM »
Unless it uses a coin drop system not a slide. Which is it?

 

PAV3200AWW Washer is stopping when it get s to rinse cycle

Started by mondoman

Replies: 1
Views: 2148
Last post December 16, 2007, 12:11:43 PM
by apptech
Maytag MAH4000 does not go into Rinse-Cycle Intermittent-Issue

Started by granaudio

Replies: 4
Views: 5741
Last post April 22, 2009, 10:36:19 PM
by granaudio
Older Maytag washer still has water in the tub at the very end of cycle.

Started by 123123123

Replies: 4
Views: 2155
Last post April 21, 2009, 04:30:09 PM
by jumptrout51
Whirlpool Commercial Washer only fills 1/2 way or less or rinse cycle

Started by bsponge

Replies: 1
Views: 1909
Last post February 24, 2010, 12:49:23 PM
by JWWebster
Maytag Neptune Stack Leaks from door during rinse cycle

Started by Jaytag

Replies: 10
Views: 4762
Last post March 30, 2011, 09:54:11 AM
by AJ
Maytag washer- RINSE/SPIN CYCLE FAILURE

Started by bizrapspin

Replies: 10
Views: 5297
Last post November 16, 2010, 01:05:42 PM
by ryan111