Author Topic: LG WM2277HW Won't Spin Issue  (Read 824 times)

Offline SEOColorado

  • VIP Member
  • Member Since: Jul 2013
  • Posts: 2
LG WM2277HW Won't Spin Issue
« on: July 04, 2013, 08:28:23 PM »
LG WM2277HW Purchased 8 Years Ago.  I keep filter clean.  Will not spin, but makes high-pitched whine when trying to.  No warning light or code comes on at all.  Need help as I have a baby and can't wash clothes.  Thanks.

Offline john63

  • Technician
  • Member Since: Feb 2010
  • Posts: 501
Re: LG WM2277HW Won't Spin Issue
« Reply #1 on: July 04, 2013, 11:52:15 PM »
<<<Will not spin, but makes high-pitched whine when trying to.>>>

************

Unplug the washer and remove the rear access/service panel.

Verify that the 17mm bolt on the Rotor is tight (WM2277 washers are NOT known for loosened bolt issues but check it regardless).

Replace the HALL EFFECT SENSOR (6501KW2002A) and the WIRE HARNESS (6877ER1016D).

Offline SEOColorado

  • VIP Member
  • Member Since: Jul 2013
  • Posts: 2
Re: LG WM2277HW Won't Spin Issue
« Reply #2 on: July 05, 2013, 06:14:01 PM »
Excellent. I will check loose connections and order appropriate parts.  Can someone point me in the direction of how to do this?  Video? Instructions? Thanks.

 

lg tromm spin issue

Started by Jos

Replies: 3
Views: 5343
Last post February 22, 2008, 10:53:16 AM
by RegUS_PatOff
Washer Issue - Runs, Fills, Start Wash...Loud Grinding for 60s, Drain, Spin Done

Started by Moose101

Replies: 16
Views: 8166
Last post April 30, 2008, 05:39:30 PM
by AJ
Spin issue

Started by Mike23

Replies: 13
Views: 3561
Last post January 16, 2009, 09:18:46 AM
by Mike23
LG WM3677HW Washer/Dryer Combo. Spin Issue.

Started by jvanness162

Replies: 14
Views: 5834
Last post June 17, 2011, 07:00:44 PM
by AJ
LG TROMM WM2277HW LOUD TAPPING DURING SPIN CYCLE

Started by dhogfoss

Replies: 9
Views: 4612
Last post February 03, 2013, 07:11:19 PM
by wildimaginations
LG WM2487HRM No Power After Spin Issue

Started by Long Time Gone

Replies: 6
Views: 1076
Last post July 10, 2014, 03:06:50 PM
by VOGUSLAVKY