Author Topic: LG Frontload with LE Error Code (WM1814CW) - Need Wiring Diagram  (Read 463 times)

Online rockinrobin

  • Technician
  • Member Since: Sep 2011
  • Posts: 177
  • Country: us
    • Buy me a beer through paypal
    • Ransom Mobile Appliance Repair Service
I have an LG Frontload Washer that stops spinning at the 5 minute mark on a 13 minute Spin Only Cycle and display's the LE error code.
I noticed a burning wire smell coming from the Stator Motor area before throwing out the error code but I don't see any smoke or burn't wire's.

With Power ON, I get 10 DCV on the White & Gray wire's (from the Hall Sensor connector at the Main PWB) and 9.? (< 10) DCV on the Blue & Gray and Red & Gray wire's.  While slowly rotating the drum both direction's,[/size] I get between 4-5 DCV on the Blue & Gray and Red & Gray wire's.
[/size]I removed/reconnected the Stator Motor & Hall Sensor harness at both end's (from the Main PWB to the part's mentioned above).I get between 5-15 Ohm's on the Stator Motor harness at the Main PWB.Therefore, I need the Wiring Diagram to check Ohm's & Voltage on the Hall Sensor harness or need instruction's on which 2 wire's (White/Gray/Red/Blue) to check with Multimeter and what is the correct amount of Ohm's (such as 10k).
 :thanks:

Offline john63

  • Technician
  • Member Since: Feb 2010
  • Posts: 487
Re: LG Frontload with LE Error Code (WM1814CW) - Need Wiring Diagram
« Reply #1 on: July 04, 2013, 12:11:54 PM »
<<<I have an LG Frontload Washer that stops spinning at the 5 minute mark on a 13 minute Spin Only Cycle and display's the LE error code.
I noticed a burning wire smell coming from the Stator Motor area before throwing out the error code but I don't see any smoke or burn't wire's.>>>

*************

An older-than-2008 washer (older Hall Sensors were Prone to failing--newer Hall Sensors do not).

The symptoms that you've described are common (intermittent tumble or spin and an electrical odor) for a failing Hall Effect Sensor (6501KW2001A).

donate
$1, $2, $5, $10, $20, $50
 

Need Service Manual for Kenmore Frontload (41744092500): Error Code E77

Started by rockinrobin

Replies: 0
Views: 886
Last post July 30, 2013, 12:47:50 PM
by rockinrobin
Whirlpool electronic error code

Started by roxgirl

Replies: 1
Views: 5121
Last post July 25, 2007, 08:15:36 PM
by AJ
Whirlpool Duet Washer - F-30 error code and clunking noise in detergent area.

Started by AJ

Replies: 3
Views: 13182
Last post November 15, 2009, 09:34:58 AM
by AJ
Kitchenaid Washer F11 Error Code

Started by TechnicianBrian

Replies: 0
Views: 5012
Last post March 23, 2008, 07:06:27 AM
by TechnicianBrian
error code F-05

Started by longbay102

Replies: 9
Views: 5140
Last post June 12, 2008, 05:41:37 PM
by whirlpooltech
Maytag Washer F01 Error Code

Started by TechnicianBrian

Replies: 0
Views: 7509
Last post June 17, 2008, 07:13:27 AM
by TechnicianBrian