well I replaced cc board on this bad boy ran a diagnostic on it now when it gets to the hot water fill section the water never stops coming in to the tub now I get a F32 which pertains to faulty pressure switch well what is F35 analog faulty pressure switch Now do I have a faulty pressure switch or a bad water valve? On another site on this subject it tells you to check volt from cc board to pressure switch and if there is volt then replace cc board I would think you would replace the switch since you are getting juice to it. I checkec continuity on all four blue wires from cc board to switch and they test out okay. I am going back and test the water valve. And remember crue I am not getting the F35 code no more?
It is the F32 code now. I am going down to my friend down the street he works for Sears maybe he has come across something like this, but so far nobody has been able to come up with the solution when i get the solution I will definitly post it so we can all learn from this. Thanks guys for all your input anyway