Author Topic: Kenmore Series 80 washer only agitates for a few minutes  (Read 590 times)

Offline ccissell

  • VIP Member
  • Member Since: Jun 2013
  • Posts: 1
Model # 11026842692 Kenmore series 80 washer will only agitate for a few minutes on heavy duty load then it stops and the timer will continue to advance through the wash cycle. In order to get the machine to start originally and to agitate for another 2 minute interval you have to  press down on dial outer ring. In the rinse cycle the only way you can get it to agitate is to hold down the outer part of the dial.  Timers for this unit is pretty pricey..I am looking for some feedback that this is indeed the issue.

Offline Bailey

  • Technician
  • Member Since: Dec 2011
  • Posts: 657
  • Country: us
Re: Kenmore Series 80 washer only agitates for a few minutes
« Reply #1 on: June 25, 2013, 01:33:35 PM »
The dial may not be seated all the way onto the shaft, thus interfering with the push pull action of the knob. Other wise it sounds like a timer problem.

 

Sears Kenmore Washer 80 series not draining but agitates and spins OK

Started by mem1966

Replies: 4
Views: 6364
Last post February 06, 2009, 04:20:43 PM
by jumptrout51
Kenmore 80 Series Washer

Started by shawnrconnelly

Replies: 5
Views: 5782
Last post October 25, 2007, 09:46:52 AM
by Pegi
Kenmore Washer will not drain or spin, agitates on the agitate lo cylce only

Started by mattz

Replies: 5
Views: 9482
Last post March 11, 2008, 09:21:43 AM
by mattz
KENMORE WASHER 60 series

Started by amnesty

Replies: 7
Views: 13776
Last post March 06, 2008, 02:48:23 PM
by JWWebster
kenmore 80 series washer

Started by buddyray

Replies: 2
Views: 6508
Last post April 19, 2008, 06:01:05 PM
by RegUS_PatOff
Kenmore 80 series washer

Started by KenOH98

Replies: 16
Views: 24493
Last post January 01, 2009, 09:28:08 PM
by bal62958