Author Topic: Control panel access  (Read 784 times)

Offline floydw68

  • VIP Member
  • Member Since: Jun 2013
  • Posts: 2
Control panel access
« on: June 18, 2013, 07:50:15 PM »
Does anyone know how to gain access into the control panel of a Kenmore 110.88752791?  This machine has the controls under the dryer and has two spring loaded screws on the underside of the panel.

Offline fairbank56

  • Technician
  • Member Since: Aug 2012
  • Posts: 417
  • Country: us
Re: Control panel access
« Reply #1 on: June 18, 2013, 08:45:48 PM »

  Loosen those two screws and then rotate the top of the control panel down.

Eric

Offline floydw68

  • VIP Member
  • Member Since: Jun 2013
  • Posts: 2
Re: Control panel access
« Reply #2 on: June 19, 2013, 07:03:40 AM »
Thanks, the metal control panel has a flange that is behind the cabinet that is preventing it from rotating.  That has been bent previously , so I am guessing it should be on the outside of the cabinet and not the inside, which is causing my frustration then.  I worked as a technician about 15 years ago, but not on Kenmore and a lot has changed since then.  Frustrating when you can fix it but can't get into it.

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1527
  • Country: us
    • Buy me a beer through paypal
Re: Control panel access
« Reply #3 on: June 19, 2013, 09:14:17 AM »
I find it easier to grab the head of the screw with pliers or vice-grips and pull straight down.

 

Video: GE Front Load Washer Repair Guide - Control Panel Access

Started by AJ

Replies: 0
Views: 3067
Last post October 14, 2009, 11:58:23 AM
by AJ
Kenmore 110.088732791 stackable - access to the control panel?

Started by kcincolo

Replies: 4
Views: 1162
Last post September 16, 2012, 11:30:42 AM
by tgoods
control panel not responding drain pump running

Started by GITOBY

Replies: 2
Views: 1606
Last post January 11, 2009, 01:34:45 AM
by laundryman
control panel seems loose

Started by habe

Replies: 2
Views: 1457
Last post January 03, 2009, 06:29:22 PM
by JWWebster
Removal of Control Panel Kenmore Washer

Started by grampac

Replies: 1
Views: 1704
Last post August 01, 2009, 07:00:03 PM
by JWWebster
Electronic control panel problems

Started by homefixitall

Replies: 3
Views: 1545
Last post October 15, 2009, 11:49:05 AM
by homefixitall