Author Topic: GE Triton Profile Performance not draining w/cycle, but will drain on reset...??  (Read 619 times)

Offline NoNameRequired

  • VIP Member
  • Member Since: Jun 2013
  • Posts: 1
I have a GE Triton Profile Performance dishwasher - approx 11 years old.  (Model GSD something-or-other) When it's done, there is a good amount of water in the basin.  This happened a couple of months ago, and I replaced the piston/nut assembly, and it was draining fine until yesterday.  Now there's water in the basin again after the cycles are complete.  It DOES DRAIN when I hit start and then quickly hit reset (when it goes through the cycles before shutting off), so obviously it has the ability to drain...it's just not doing it when it's supposed to.  I have to do the start/reset thing 3 times to get it to drain completely.   Suggestions???  I'm about ready to start scanning the Best Buy ads for a new one.... :tickedoff:

Online tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1440
  • Country: us
    • Buy me a beer through paypal
Model number?  Check the air gap at the sink for toothpicks.

 

GE Profile Triton Dishwasher not draining

Started by cjh

Replies: 5
Views: 3467
Last post December 08, 2011, 10:48:38 PM
by rego
GE Triton Dishwasher not fully draining

Started by Cavandish

Replies: 14
Views: 20314
Last post August 01, 2009, 09:37:22 PM
by GuitarMan
Whirlpool QuietPartner II Dishwasher will not drain on normal cycle?

Started by super20g

Replies: 0
Views: 1374
Last post May 19, 2009, 09:05:32 AM
by super20g
kitchen Aid Dishwasher and drain cycle

Started by NJ Mom

Replies: 2
Views: 1646
Last post March 17, 2011, 12:03:19 PM
by NJ Mom
Triton Dishwasher is not draining

Started by jacady

Replies: 3
Views: 3097
Last post March 31, 2011, 11:44:04 AM
by ryan111
GE Profile dishwasher won't drain

Started by sguthrie04

Replies: 1
Views: 2293
Last post June 05, 2011, 02:05:00 PM
by jumptrout51