Author Topic: Marvel Ice Machine  (Read 746 times)

Offline All Brand

  • Technician
  • Member Since: Sep 2010
  • Posts: 70
  • Country: us
Marvel Ice Machine
« on: June 18, 2013, 02:17:11 PM »
Mod 301M5904 Have in my shop to replace a bad condenser fan motor Can anyone explain how to get to it,There is no play in anypart to raise the cabinet off, can get maybe a couple of inches that it.

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Marvel Ice Machine
« Reply #1 on: June 18, 2013, 02:48:47 PM »
I believe you access it the same as the Kitchenaid I/M.
Remove 2 screws from the bottom front and tilt the cabinet slightly to the rear.
The water valve and hot gas valve have to be disconnected first.
Take a Kid fishing.

Offline Spannerwrench

  • Technician
  • Member Since: May 2012
  • Posts: 74
Re: Marvel Ice Machine
« Reply #2 on: June 19, 2013, 05:41:10 AM »
The Marvel Built IMs don't come apart like the Whirlpool built.  To change the condenser fan motor you have to slide the chassis out of the rear of the cabinet.

Here's the Service Manual!

https://www.dropbox.com/s/e4506gonwhu36xw/30iM%2C%2030iMA%2C%203OiM-SS-F%20Short%20Door%20Ice%20Machine%20Service%20Manual.pdf

 

Ice Machine Problem

Started by crawling

Replies: 24
Views: 7962
Last post December 05, 2008, 04:42:13 PM
by jumptrout51
GE Profile (5 years old) sounds like machine gun!

Started by gadams713

Replies: 2
Views: 1943
Last post June 22, 2009, 07:43:16 AM
by gadams713
Kitchenaid Superba Fridge Ice Machine Not Working. Help Needed

Started by bobafart

Replies: 11
Views: 36455
Last post October 05, 2009, 11:05:32 PM
by krazytech
AM-50BAE Hoshizaki Ice Machine will not Harvest

Started by Earl Dryer

Replies: 11
Views: 4483
Last post October 21, 2009, 09:45:43 PM
by fixyourboard
No water getting to Ice Machine

Started by veryblond

Replies: 4
Views: 2888
Last post July 11, 2010, 11:38:00 AM
by jumptrout51
DCE33A-1WB Scotsman Ice Machine low side pressure?

Started by JWWebster

Replies: 19
Views: 9086
Last post April 17, 2011, 06:23:14 PM
by JWWebster