First off, I'm not a tech.
My roommate tried to run another cycle after it stopped working, and "says" he didn't see an f code.
There is display, but when you turn on the washer and select a cycle and attempt to start, the washer locks the door but I do not hear any other sounds. When I attempt to turn off washer, door remains locked and the "add garment" light continues to flash.
Local appliance repair guy tried swapping out the control board, pressure switch, latch assembly and water valve. He said he'll try swapping the motor control board but there is no power going to the board right now.
Any idea what's going on?
Thanks for your time,