Author Topic: GE bottom freezer  (Read 4886 times)

Online Rick32k

  • Technician
  • Member Since: May 2012
  • Posts: 143
  • Country: us
Re: GE bottom freezer
« Reply #20 on: June 19, 2013, 01:42:28 PM »
The only power to the board is the 120v going in. The DC voltage should be converted and delivered from the board. Right?

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1188
Re: GE bottom freezer
« Reply #21 on: June 19, 2013, 02:10:47 PM »
Yes

Offline ApplianceGuru

  • Technician
  • Member Since: Mar 2012
  • Posts: 184
  • Country: us
Re: GE bottom freezer
« Reply #22 on: June 19, 2013, 02:11:43 PM »
defective new main board?
Appliance Heating & Air Tech

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1188
Re: GE bottom freezer
« Reply #23 on: June 19, 2013, 02:13:08 PM »
Yep

Online Rick32k

  • Technician
  • Member Since: May 2012
  • Posts: 143
  • Country: us
Re: GE bottom freezer
« Reply #24 on: June 19, 2013, 03:22:00 PM »
I'm gonna try and see if its loosing the. 24v common at the evaporator motor.

Online dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 1664
  • Country: us
Re: GE bottom freezer
« Reply #25 on: June 19, 2013, 04:33:01 PM »
If you install a new board again i would leave J2 unplug and see if compressor turns on and the display lights up.How many board have you install on this?If that evap. fan is shorted it will blow board again.What to you think about leaving J2 up plug to see if compressor and display lights come on ANYBODY.Just as a test.Also never seen a condoners fan goes bad were it blows out board.He says compressor does not even come on and also display.My thinking is if compressor comes on with J2 unplug and displays comes  on bad evap.fan motor. What to you guys think?

Online dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 1664
  • Country: us
Re: GE bottom freezer
« Reply #26 on: June 19, 2013, 04:41:52 PM »
Yea Rick also check all thermistors as from the J1 plug as they all should have about the same resistance as the box has been shut off.I guess this is the case.

Online Rick32k

  • Technician
  • Member Since: May 2012
  • Posts: 143
  • Country: us
Re: GE bottom freezer
« Reply #27 on: June 19, 2013, 04:54:47 PM »
I can't figure how to get the freezer back panel off! But it works with the J2 connector off so I just need to change the fan now.

Online Rick32k

  • Technician
  • Member Since: May 2012
  • Posts: 143
  • Country: us
Re: GE bottom freezer
« Reply #28 on: June 19, 2013, 10:24:16 PM »
That panel was a pain In the ass to get off but ingot it off and switched out the fan and it works fine. Thanks to all you guys for the help. I was so excited when I fixed it. And on the way out another guy stopped me and asked to fix his fridge I fixed it and made something off that too.

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1188
Re: GE bottom freezer
« Reply #29 on: June 19, 2013, 11:44:43 PM »
Good job

 

Amana Bottom Freezer Refrig - Fan Cycling

Started by kdaug

Replies: 5
Views: 5753
Last post August 08, 2008, 02:28:50 PM
by Repair-man
frozen water in bottom of freezer, leaks on floor

Started by soccrates

Replies: 3
Views: 5520
Last post June 19, 2009, 05:52:22 AM
by Repair-man
Maytag/Amana bottom freezer compressor failures

Started by Earl Dryer

Replies: 10
Views: 7452
Last post June 27, 2009, 10:52:38 PM
by theoldstoveguy
Amana French Door, bottom freezer

Started by Asianjade

Replies: 2
Views: 3168
Last post June 23, 2009, 02:14:52 PM
by Asianjade
GE Monogram Bottom Freezer Defrost Not Working

Started by NYME

Replies: 3
Views: 3902
Last post July 07, 2009, 07:39:28 PM
by JWWebster
GE bottom freezer - display screen flashes after power flickered

Started by haney2

Replies: 3
Views: 2071
Last post January 10, 2010, 05:35:14 PM
by haney2