Author Topic: Maytag dishwasher MDBH970AWS  (Read 655 times)

Offline lanker45

  • VIP Member
  • Member Since: Apr 2011
  • Posts: 11
Maytag dishwasher MDBH970AWS
« on: June 11, 2013, 02:26:54 PM »
Does any one know were I can get a copy of error codes for Maytag Dish washer m/ MDBH970AWS ? I get error code 2H not 2h, checked both door latch micro switches they ohm out fine and click as exspected, also replaced main board.

Offline Bailey

  • Technician
  • Member Since: Dec 2011
  • Posts: 650
  • Country: us
Re: Maytag dishwasher MDBH970AWS
« Reply #1 on: June 11, 2013, 06:50:06 PM »
Does the 2H pop up as soon as the cycles is started? If so that is the length of the cycle. 2 hours. Choose another cycle and see if it changes.

Offline lanker45

  • VIP Member
  • Member Since: Apr 2011
  • Posts: 11
Re: Maytag dishwasher MDBH970AWS
« Reply #2 on: June 12, 2013, 02:33:12 PM »
It does, 2H upon cycle selected. tried other cycles but same issue. I'll try power cycle and see if its just a first time powerup thing with these boards..... perhaps it will reset for correct operation.???????
Heard tell there were issues with this board & that there were no Error codes built into unit. Manual Function & Field Service tests do not respond as well, they did 6months ago when I installed a new cutter blade & water seal in unit.

 

Maytag MDBTT60AWW dishwasher.

Started by Bob

Replies: 3
Views: 7517
Last post September 07, 2007, 07:47:07 AM
by AJ
Maytag dishwasher Control panel replacement

Started by Pastyann

Replies: 1
Views: 6875
Last post September 20, 2007, 12:28:07 PM
by AJ
Maytag dishwasher shaft

Started by tucsondave

Replies: 4
Views: 3596
Last post January 04, 2008, 11:46:29 PM
by AJ
Maytag dishwasher

Started by kdeanes

Replies: 2
Views: 3395
Last post January 24, 2008, 02:02:25 PM
by RegUS_PatOff
Intermittent Problem with Maytag Dishwasher

Started by Firenut

Replies: 2
Views: 5735
Last post March 29, 2008, 12:43:53 PM
by JWWebster
Maytag Performa Dishwasher Manual

Started by Repair-man

Replies: 0
Views: 17283
Last post March 28, 2008, 08:58:14 PM
by Repair-man