Author Topic: Photos: Whirlpool Duet washer with bad bearings, only 2.5 years old!  (Read 30246 times)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9222
  • Country: us
    • ApplianceJunk.com - Appliance Repair Help
Here are some photos of a Whirlpool Duet washer that we had to replace the tub and basket on because of the bearings.  >:(










WHIRLPOOL Duet Outer Tub, part number: AP4426951






Whirlpool Duet Basket, part number: AP4459040






L-68 Whirlpool Duet Front Loading Washers Service Repair Manual




Hope you find our site helpful.

Offline Pegi

  • VIP Member
  • Member Since: Aug 2007
  • Posts: 109
  • Country: us
  • Owner/Tech
Re: Photos: Whirlpool Duet washer with bad bearings, only 2.5 years old!
« Reply #1 on: September 07, 2007, 12:31:02 PM »
Oh Yuck!!  Guess I better pull my Duet out and take a look at my bearings, not having any problems but it is about 6 years old...

Offline Pegi

  • VIP Member
  • Member Since: Aug 2007
  • Posts: 109
  • Country: us
  • Owner/Tech
Re: Photos: Whirlpool Duet washer with bad bearings, only 2.5 years old!
« Reply #2 on: September 07, 2007, 12:36:51 PM »
Of course I use HE soap and not much, suds eat the bearings so this is a good photo to show people to use ONLY HE SOAP AND 1-3 TABLESPOONS ONLY....and no you cannot just use less of regular soap..that stuff suds up and clogs front load washers and eats bearings...suds is the enemy of all front load washers..

Offline volkskid

  • VIP Member
  • Member Since: Feb 2008
  • Posts: 12
Re: Photos: Whirlpool Duet washer with bad bearings, only 2.5 years old!
« Reply #3 on: February 22, 2008, 06:50:16 PM »
Wow! You need to replace the whole tub just to replace the bearing? Mine is starting to get really loud when it's spinning in the fast cycle. We never used anything other then HE soap in this thing. I'am affraid to see what is lurking behind those panels once it's opened up.
Thanks for the pictures........this really clears up alot for me!

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9222
  • Country: us
    • ApplianceJunk.com - Appliance Repair Help
Re: Photos: Whirlpool Duet washer with bad bearings, only 2.5 years old!
« Reply #4 on: February 22, 2008, 09:32:15 PM »
Quote
Wow! You need to replace the whole tub just to replace the bearing?

Yes I m afraid so.

I must say over all these duets have been good machines.
Much, much better then the Maytag MAH3000 and MAH4000 Neptune front load washer.

How old is your duet washer?
Hope you find our site helpful.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Photos: Whirlpool Duet washer with bad bearings, only 2.5 years old!
« Reply #5 on: February 23, 2008, 04:30:05 PM »
I am looking forward to working on one of these :tickedoff: :D ;D
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9222
  • Country: us
    • ApplianceJunk.com - Appliance Repair Help
Re: Photos: Whirlpool Duet washer with bad bearings, only 2.5 years old!
« Reply #6 on: February 23, 2008, 05:00:29 PM »
Have fun JW :)
Hope you find our site helpful.

Offline volkskid

  • VIP Member
  • Member Since: Feb 2008
  • Posts: 12
Re: Photos: Whirlpool Duet washer with bad bearings, only 2.5 years old!
« Reply #7 on: February 25, 2008, 10:00:47 PM »
My Duet is only 2 years old in April..........I had the pump changed at 6 months. I'm starting to feel as though these machines are not as reliable as I thought.

I have a question though. Is this bearing in contact with water/soap all the time when washing? Is this not a sealed bearing? I don't see the logic. As I mentioned in my previous post, we only ever used HE soap. Is there anything else that can cause this bearing to go bad? I have read the instructions over and over, and done the services they ask for.

Thank you in advance for any answers you will have for me!

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Photos: Whirlpool Duet washer with bad bearings, only 2.5 years old!
« Reply #8 on: February 26, 2008, 06:56:39 AM »
Quote
Is this bearing in contact with water/soap all the time when washing?

No, it is higher then the water level.

I don't understand how or why they really fail eather.

The seal that should keep the water out of the bearing leaks.
This lets water get into the bearing. After the bearing is able to get wet things start to go bad.

Why does the seal fail and leak?
It does not sit in water?

Even if it did they have made top load washer were the tub seals sit in water all the time and they held up better.

Offline volkskid

  • VIP Member
  • Member Since: Feb 2008
  • Posts: 12
Re: Photos: Whirlpool Duet washer with bad bearings, only 2.5 years old!
« Reply #9 on: February 26, 2008, 11:25:21 AM »
Well thanks for the answers. I am glad that I took an extended warrenty on my appliances, but after thats going to be up, I will enjoy working on them myself.

One worry I have is that I don t really know where to get parts at a good price for them. I am in Montreal Canada. Does anyone know any place that sells parts for these washers and driers?

Thank you again for the answers!

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Photos: Whirlpool Duet washer with bad bearings, only 2.5 years old!
« Reply #10 on: February 26, 2008, 11:51:23 AM »
 O0
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline volkskid

  • VIP Member
  • Member Since: Feb 2008
  • Posts: 12
Re: Photos: Whirlpool Duet washer with bad bearings, only 2.5 years old!
« Reply #11 on: February 26, 2008, 05:07:55 PM »
Thank You very much for these sites!

Offline volkskid

  • VIP Member
  • Member Since: Feb 2008
  • Posts: 12
Re: Photos: Whirlpool Duet washer with bad bearings, only 2.5 years old!
« Reply #12 on: February 29, 2008, 02:03:46 PM »
Well the washer Technician came today! Before he even touched the machine I told him it was the tub bearing, I spun the tub by hand... He agreed, took the product number and said "see you in a couple of weeks, we have to order the parts."

So we will have to live with the sound of a jet taking off for awhile more.....I just hope nothing further gets damaged!

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9222
  • Country: us
    • ApplianceJunk.com - Appliance Repair Help
Re: Photos: Whirlpool Duet washer with bad bearings, only 2.5 years old!
« Reply #13 on: February 29, 2008, 02:45:48 PM »
It should be fine for a couple weeks.
I have known some of these machines to run with bad bearings for a month or longer.

Hope you find our site helpful.

Offline volkskid

  • VIP Member
  • Member Since: Feb 2008
  • Posts: 12
Re: Photos: Whirlpool Duet washer with bad bearings, only 2.5 years old!
« Reply #14 on: February 29, 2008, 03:50:02 PM »
Hehehe....a month? Mine has been getting noiser and noiser...it's been about 6 month's if not more! I think I was getting used to it, until my brother in law who has the same machine said his is not that loud...! Now I can hear it from the third floor!

Anyway, thanks for all the advice!

 

Video: Whirlpool Duet Front Load Washer Water Pump Clean Out.

Started by AJ

Replies: 0
Views: 5181
Last post November 28, 2007, 09:58:47 PM
by AJ
How to replace a Whirlpool Duet washer bellow tub door seal

Started by AJ

Replies: 39
Views: 69111
Last post December 24, 2013, 12:16:46 AM
by GB-NC
Whirlpool Duet Washer - F-30 error code and clunking noise in detergent area.

Started by AJ

Replies: 3
Views: 12371
Last post November 15, 2009, 09:34:58 AM
by AJ
Whirlpool Duet Sport Front Load Washer Leaking from the Door

Started by TechnicianBrian

Replies: 1
Views: 13148
Last post May 23, 2013, 08:24:30 PM
by Rick32k
Whirlpool Duet Washer, no Operation

Started by TechnicianBrian

Replies: 1
Views: 2457
Last post August 29, 2008, 01:37:12 PM
by JWWebster
Whirlpool Duet Washer Error Codes

Started by AJ

Replies: 0
Views: 27053
Last post September 13, 2008, 10:38:25 PM
by AJ