Maytag Centennial MVWC500VW1
Well this is my dilemma.:
Selecting COLD water, fill with COLD water. (no problem)
Selecting WARM water , fill with WARM water (no problem)
Selecting HOT water , fills with WARM water!!!
For testing purpose, I set the Water Temperature switch to “HOT” and started to fill with warm water, so I turned off the cold water valve from the wall , then only HOT water came into the tub. But as soon as i opened the cold valve from the wall again came warm water to tub.
Both Water valves are working, It looks that water selector is not working. So I replace the Water selector (it is a new electronic module switch) and still not fill only hot water.
My questions are:
the electronic module senses the temperature and does not allow use hot water only.
The new ATC Water Selector has a fault.
Might the Timer be making this?
Is there any other part I should check.
Please Help and thanks