Free Service - Appliance Repair Help & Troubleshooting

Author Topic: No heat,gas smell  (Read 575 times)

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1527
  • Country: us
    • Buy me a beer through paypal
Re: No heat,gas smell
« Reply #10 on: October 01, 2016, 09:23:36 PM »
So you fall in the 5% but needs the burner I mentioned.MDG4000? BWW

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1527
  • Country: us
    • Buy me a beer through paypal
Re: No heat,gas smell
« Reply #11 on: October 01, 2016, 09:26:14 PM »
If it is yes the part number is WP33002793. Keep that dryer as long as you can. Did Maytag service for 26 years and sold hundreds. Still servicing machines I sold 35 years ago.

Offline afterblast

  • Technician
  • Member Since: Feb 2013
  • Posts: 266
  • Country: us
Re: No heat,gas smell
« Reply #12 on: October 01, 2016, 09:31:19 PM »
when you change that burner out be very careful with the igniter..  if you whack it against the side of the burner tube as your pulling that assembly out, or otherwise give it a hit it'll likely crack or shatter and you'll have to replace it as well...

Offline IsaacG

  • VIP Member
  • Member Since: Sep 2016
  • Posts: 7
Re: No heat,gas smell
« Reply #13 on: October 01, 2016, 09:32:32 PM »
If it is yes the part number is WP33002793. Keep that dryer as long as you can. Did Maytag service for 26 years and sold hundreds. Still servicing machines I sold 35 years ago.
Thanx will do and hopefully that's all it needs  O0

Offline IsaacG

  • VIP Member
  • Member Since: Sep 2016
  • Posts: 7
Re: No heat,gas smell
« Reply #14 on: October 01, 2016, 09:48:10 PM »
when you change that burner out be very careful with the igniter..  if you whack it against the side of the burner tube as your pulling that assembly out, or otherwise give it a hit it'll likely crack or shatter and you'll have to replace it as well...
Oh yes forsure I'll take the igniter off so I don't accidentally break it. Is it easy to take off the burner assembly? I took off a little screw on top and tried to pull off but it seems to be on there pretty tight.

Offline afterblast

  • Technician
  • Member Since: Feb 2013
  • Posts: 266
  • Country: us
Re: No heat,gas smell
« Reply #15 on: October 01, 2016, 10:31:07 PM »
the little screw on top usually goes to the air shutter, not sure on your particular model, but usually the burner is held in place by a screw or two on the vertical part under it between the tube and the base of the dryer, usually with 5/16 sheet metal screws

Offline IsaacG

  • VIP Member
  • Member Since: Sep 2016
  • Posts: 7
Re: No heat,gas smell
« Reply #16 on: October 08, 2016, 01:42:54 AM »
Thanks to theoldstoveguy and after blast for the info. I got the assembly and coils installed and everything works perfectly O0

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1527
  • Country: us
    • Buy me a beer through paypal
Re: No heat,gas smell
« Reply #17 on: October 08, 2016, 08:49:27 AM »
 O0

 

No heat and now I smell gas

Started by Martin1pro

Replies: 4
Views: 287
Last post November 16, 2016, 05:48:27 PM
by Maintech
IA84600 Inglis dryer doesn't heat

Started by RickT

Replies: 5
Views: 11135
Last post January 16, 2008, 04:02:42 PM
by JWWebster
maytag dryer model # md 3500 (no heat)

Started by #13

Replies: 5
Views: 10391
Last post December 05, 2007, 07:15:02 AM
by apptech
LG gas dryer wont heat

Started by berniet

Replies: 17
Views: 21891
Last post December 03, 2014, 12:15:07 AM
by BillR625
Whirlpool Dryer - Run, but does not heat.

Started by AJ

Replies: 5
Views: 6286
Last post May 30, 2015, 09:07:45 AM
by fairbank56
Creda dryer runs but makes only a little heat

Started by goldstonemr

Replies: 33
Views: 20006
Last post April 27, 2008, 02:56:23 PM
by Penguin45