Author Topic: GE model GFWH2400LWW  (Read 927 times)

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1172
GE model GFWH2400LWW
« on: May 22, 2013, 08:09:35 PM »
Went on this call today,customer says the unit about 4 times has just shut itself off. No lights nothing. They unplug it and restart it. Ok no problem. Then she tells me when she restarted it the other day it just finished the cycle. Ran diagnostics,no error codes. Unit tested fine, checked operation and everything tested fine. What or how could everything shut off and then it just start right back up in the middle of the cycle that it was in. Sounded at first like a control board but now I am not so sure. Wires check good.

Offline LowSL2

  • Technician
  • Member Since: Dec 2011
  • Posts: 853
  • Country: us
  • Fletch F. Fletch
    • Buy me a beer through paypal
Re: GE model GFWH2400LWW
« Reply #1 on: May 23, 2013, 09:56:46 AM »
If it completes the cycle after power is restored, I would assume that it's loosing power during the cycle. It could be a bad control board if all the wiring and EMI filter are good.

Sent from my DROID BIONIC using Tapatalk 2

LowSL2
15 Years of Professional Appliance Repair Experience

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1172
Re: GE model GFWH2400LWW
« Reply #2 on: May 23, 2013, 10:02:51 AM »
My thoughts also but because it completes the cycle right where it was I'm wondering about the filter both checked out I never had a filter do this but how can the board shut down but start back up right were it was in the cycle and finish washing

Offline PARTech

  • Technician
  • Member Since: May 2009
  • Posts: 415
  • Country: us
    • Buy me a beer through paypal
    • Panhandle Appliance LLC
Re: GE model GFWH2400LWW
« Reply #3 on: May 24, 2013, 01:06:22 AM »
Check the wall plug, never hurts to eliminate that...
Serving North Idaho

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1172
Re: GE model GFWH2400LWW
« Reply #4 on: May 24, 2013, 12:17:23 PM »
First thing I checked

 

Ge model GFWH2400LWW

Started by niobrara

Replies: 0
Views: 409
Last post June 02, 2013, 02:00:57 PM
by niobrara
Maytag Washer Model mav7600aww, noisy

Started by dex

Replies: 1
Views: 4837
Last post October 31, 2007, 05:50:56 PM
by rickgburton
Maytag Atlantis Model (MAV9501EWW) Will Not Start

Started by mngambas

Replies: 8
Views: 7000
Last post November 01, 2007, 11:42:28 AM
by mngambas
Replacing Front Load Washer Pump Model#LHW0050PQ

Started by resapp

Replies: 4
Views: 2863
Last post May 22, 2012, 12:34:13 PM
by AJ
whirlpool washer model LXR9245EQ1- won't drain-slow spin

Started by fixmeplz

Replies: 2
Views: 6559
Last post January 16, 2008, 10:13:02 PM
by JWWebster
whirlpool washer model LSR9434PQ0 won't agitate or spin

Started by jhuffman

Replies: 4
Views: 2551
Last post May 28, 2012, 06:16:50 PM
by JWWebster