Author Topic: Kenmore Elite oasis F40 error code.  (Read 3127 times)

Offline NewTech11

  • Technician
  • Member Since: May 2011
  • Posts: 18
Kenmore Elite oasis F40 error code.
« on: May 15, 2013, 03:32:59 PM »
Afternoon fellow tech.
I have an Oasis dryer 110.67062000. Customer complained about it starting and stopping. When I arrived at the customer the machine displayed error code F40. I ran the diagnostic and F40 was the only code.
I check the exhaust thermistor and it showed open. So I replaced it with 8577274. The F40 was still there. I had a problem getting a reading on the intake thermistor. (Big hands and small places ::) } So I order a new inlet thermistor and a machine control {Of course from repairclinic!)
Just wondering from you gentlemen and ladies experience. Am I really looking replacing the machine controller. Been out to this customer 3 times about this error.
 
Thanks
NewTech one one

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1187
Re: Kenmore Elite oasis F40 error code.
« Reply #1 on: May 15, 2013, 09:23:59 PM »
You can try disconnecting the connections from the board to the control and resetting them see if that helps if not ohm all the wires and if that tests your at the board. Double check all connections.

Offline NewTech11

  • Technician
  • Member Since: May 2011
  • Posts: 18
Re: Kenmore Elite oasis F40 error code.
« Reply #2 on: May 16, 2013, 08:58:58 AM »
Thx's. Niobrara
I pulled all the connectors out and place them back. I didn't get a chance to check wires. Customer had an prior appt.


Sent from my ADR6410LVW using Tapatalk 2


 

Error code 40 on Oasis Elite Dryer

Started by MWCmike

Replies: 3
Views: 4351
Last post September 16, 2008, 03:36:21 PM
by Repair-man
Kenmore Elite HE5 Dryer - NO DISPLAY - BEEP - F70 Error Code

Started by Blaiser

Replies: 5
Views: 742
Last post September 03, 2014, 08:05:04 PM
by Blaiser
Kenmore Elite Oasis Electric Dryer - Keeps blowing thermal fuse

Started by bauercb

Replies: 4
Views: 737
Last post October 30, 2014, 08:33:28 AM
by bauercb
Whirlpool Steam Dryer F23 Error Code

Started by TechnicianBrian

Replies: 2
Views: 6525
Last post April 25, 2008, 08:25:02 PM
by TechnicianBrian
Frigidaire error code E9E

Started by thansen

Replies: 2
Views: 5326
Last post October 26, 2008, 02:40:02 PM
by thansen
Electric Dryer LEQ2152ES0 not heating error code e56

Started by DeeStough

Replies: 11
Views: 10791
Last post February 23, 2011, 12:06:45 AM
by AJ