Author Topic: F30 error Maytag FL MHWE450WW02  (Read 1002 times)

Offline jdoxakis

  • VIP Member
  • Member Since: May 2013
  • Posts: 5
F30 error Maytag FL MHWE450WW02
« on: May 10, 2013, 04:17:12 PM »
Honestly it has been acting up for awhile, a lot of F20 errors.  You can only use normal cycle on cold.  Some idiot over here overloaded the washer and there was a lot of debris in the tub when I pulled the clothes out.  Water will not fill tub, it starts to turn but then ends in F30 error with dry clothing.  I checked the hoses going to and from the washer to rule out a screen blockage.  I opened the bottom cabinet, removed the spring clamp from the drain hose (the interior part of the hose) and very stagnant stinky water came pouring out.  It seems like there has been a drain issue for awhile.  There is another hose that hooks up to what I think is the drain pump assembly.  It is 11 on the diagram.  It appears this part unscrews from its casing but it wont budge.  I would take the spring clamp off the other end where the hose connects to this but due to the angle I there isn't enough room to get pliers or anything in there.  HELP!!  I am trying to figure out where to check for blockages and the best route to take.

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1187
Re: F30 error Maytag FL MHWE450WW02
« Reply #1 on: May 10, 2013, 05:38:33 PM »
F30 is a actuator issue. Take the top off and see if your cam on top of the soap dispenser is moving. Cleaning the drain pumo out may have solved your f 20.

Offline jdoxakis

  • VIP Member
  • Member Since: May 2013
  • Posts: 5
Re: F30 error Maytag FL MHWE450WW02
« Reply #2 on: May 10, 2013, 07:43:14 PM »
ok, I will check that.  I figured if it wasn't draining properly it would not be able to fill with water

Offline jdoxakis

  • VIP Member
  • Member Since: May 2013
  • Posts: 5
Re: F30 error Maytag FL MHWE450WW02
« Reply #3 on: May 11, 2013, 10:48:06 PM »
ok, I took the top off.  There is a spindle that is turning but it doesn't stop at any position I, II, III, IV.  It just keeps on spinning and turning.  Where can I get that part and is it a sensor of some sort?

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1187
Re: F30 error Maytag FL MHWE450WW02
« Reply #4 on: May 12, 2013, 10:42:45 AM »

Dispenser Actuator

Item # 1878492   right here

 

F70 error on maytag 4000 series MHWE450WW02

Started by jdoxakis

Replies: 2
Views: 1041
Last post May 20, 2013, 02:54:48 PM
by def
Maytag Washer F01 Error Code

Started by TechnicianBrian

Replies: 0
Views: 8448
Last post June 17, 2008, 07:13:27 AM
by TechnicianBrian
Maytag Neptune TL Washer UC Error Code

Started by TechnicianBrian

Replies: 0
Views: 22934
Last post October 14, 2008, 06:38:41 AM
by TechnicianBrian
maytag neptune washer top loader error message OL8 WHAT DOES IT MEAN

Started by getitdone

Replies: 3
Views: 2378
Last post January 26, 2009, 07:39:14 PM
by Repair-man
My Maytag gives the error code "do" and the door is closed.

Started by briancalhoun

Replies: 2
Views: 1787
Last post August 15, 2009, 12:14:54 PM
by briancalhoun
HR error code Maytag Washer

Started by gkofc

Replies: 0
Views: 2462
Last post January 14, 2010, 09:25:13 AM
by gkofc