Author Topic: DU1055XTVS2 won't heat  (Read 1088 times)

Offline dentdaddy

  • Technician
  • Member Since: Feb 2010
  • Posts: 171
  • Country: us
DU1055XTVS2 won't heat
« on: May 01, 2013, 07:27:38 AM »
I worked on this unit a few weeks ago. Heater and thermostat ohmed OK, so I replaced the board w10285180 and thermostat 661566 . There is no tech sheet with this thing and I couldnt find one online. (maybe there's one in googledrive...I'll check  O0 ) I wonder if sensor pt number w10134017 would have something to do with the heat cycle.


Customer has lived in the home for 2 years since it was new and says the DW has never worked right. She has "on demand" water heaters, and the temp at the sink, after running water for a full minute, was only 105*.


Any help is appreciated.
Good work isn't cheap. Cheap work isn't good.
SW Oklahoma

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1172
Re: DU1055XTVS2 won't heat
« Reply #1 on: May 01, 2013, 04:27:23 PM »
Element getting power to it from control board. If power to it and not thru it element bad.Could be a wire but first make sure your getting power to it.

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1513
  • Country: us
    • Buy me a beer through paypal
Re: DU1055XTVS2 won't heat
« Reply #2 on: May 01, 2013, 06:24:41 PM »

Offline dentdaddy

  • Technician
  • Member Since: Feb 2010
  • Posts: 171
  • Country: us
Re: DU1055XTVS2 won't heat
« Reply #3 on: May 02, 2013, 09:18:29 AM »
Thanks fella's!

I do recall getting voltage through the heater. I know on the board there is a molex that comes from the OWI sensor that states "Temp" on 2 of the 4 wires that plug into it. On the tech sheet it appears as though there is a thermistor within the OWI sensor that could be bad. I'm thinking I should have a heater and an OWI sensor with me when I go back.

Thanks for tech sheet.
Good work isn't cheap. Cheap work isn't good.
SW Oklahoma

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9435
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: DU1055XTVS2 won't heat
« Reply #4 on: May 08, 2013, 09:16:45 AM »
What did you end up doing to fix it?
Hope you find our site helpful.

Offline dentdaddy

  • Technician
  • Member Since: Feb 2010
  • Posts: 171
  • Country: us
Re: DU1055XTVS2 won't heat
« Reply #5 on: May 08, 2013, 12:05:19 PM »
Going back to it on the 13th. I'll let you know.
Good work isn't cheap. Cheap work isn't good.
SW Oklahoma

 

KitchenAid diswasher heat fuse

Started by smartypants

Replies: 5
Views: 4372
Last post August 14, 2008, 07:07:03 AM
by AJ
Miele Dishwasher has plastic melted to drying/heat strip

Started by thewebb

Replies: 1
Views: 1451
Last post January 13, 2009, 12:13:19 PM
by Repair-man
Dishwasher heat element was white and sorta smelled bad and now just stopped

Started by Shers

Replies: 24
Views: 4976
Last post June 04, 2010, 03:31:33 PM
by AJ
Frigidair Gallery GLD2250RDC3 flashes hi temp and no heat lights

Started by Supermag

Replies: 1
Views: 1185
Last post January 09, 2012, 09:52:42 PM
by whirlpooltech