Author Topic: Maytag Centennial TL won't Fill during Wash/Rinse Cycle (MVWC6ESWW1)  (Read 1397 times)

Offline rockinrobin

  • VIP Member
  • Member Since: Sep 2011
  • Posts: 123
  • Country: us
This Washer is 2-3 Years Old and it won't fill with water during Wash/Rinse cycle. Also, the tub spins at the beginning of Rinse. ???
Cleared pressure tube and there's no power going to the Inlet Valve.
Therefore, I need to check VAC on wire harness that connects to the Auto Load Sensing Switch during Fill for Wash/Rinse but don't know which wires to check (maybe Blue & Orange)?
I understand that if I have AC Voltage then Timer is OK and I need to replace Sensing Switch.
Also, do you have a Service Manual for this Washer?

Offline rockinrobin

  • VIP Member
  • Member Since: Sep 2011
  • Posts: 123
  • Country: us
I replaced the Timer and it's working normal again. However, if it acts up again then I'll replace the Temperature Switch.

Offline AJ

  • Technician
  • Member Since: Jun 2007
  • Posts: 9229
  • Country: us
    • - Appliance Repair Help
Thanks for the update,  O0


Maytag MAH4000 does not go into Rinse-Cycle Intermittent-Issue

Started by granaudio

Replies: 4
Views: 5365
Last post April 22, 2009, 10:36:19 PM
by granaudio
Maytag Neptune Stack Leaks from door during rinse cycle

Started by Jaytag

Replies: 10
Views: 4322
Last post March 30, 2011, 09:54:11 AM
by AJ
Maytag A183 washer drains during Spin cycle fill

Started by Louis

Replies: 2
Views: 1909
Last post August 28, 2010, 01:26:03 PM
by JWWebster

Started by bizrapspin

Replies: 10
Views: 4858
Last post November 16, 2010, 01:05:42 PM
by ryan111
Washing machine won't go to wash/spin/rinse cycle

Started by yubert

Replies: 23
Views: 8754
Last post July 14, 2011, 06:11:06 AM
by yubert
Maytag Centennial does not fill

Started by megso

Replies: 5
Views: 1705
Last post January 06, 2012, 07:39:25 AM
by megso