Author Topic: Maytag centennial top load washer fills with water when the spin cycle is ending  (Read 2966 times)

Offline alimunib83

  • Technician
  • Member Since: Mar 2013
  • Posts: 10
  • Country: us
I have a maytag centennial washer that fills with water towards the end of the spin cycle roughly about 25 secs b4 it ends and leaves water in the clothes at the end of the cycle as if its going to extra rinse. Although the extra rinse is turned off, just to make sure if extra rinse switch wasn't causing the problem I unplugged it but still same problem. Somebody told me it could be the bad timer I replaced it but still the same problem exists. I would really appreciate any professional help on the problem.

Ali

Online LowSL2

  • Technician
  • Member Since: Dec 2011
  • Posts: 852
  • Country: us
  • Fletch F. Fletch
    • Buy me a beer through paypal
Model number please.

If it's a direct drive, it might be the ATC switch. But will need the model number to be sure.

Sent from my DROID BIONIC using Tapatalk 2

LowSL2
15 Years of Professional Appliance Repair Experience

Offline alimunib83

  • Technician
  • Member Since: Mar 2013
  • Posts: 10
  • Country: us
Model # Mvwc6esww1
Ser     # cy4440359

Offline fairbank56

  • Technician
  • Member Since: Aug 2012
  • Posts: 391
  • Country: us

  Bad water level/temp controller. High failure item. Complain to Whirlpool.

http://www.appliancepartspros.com/whirlpool-temperature-switch-w10248240-ap4459660.html

Eric

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
I had a couple where I disconnected,then reconnected the ATC and they are still working.
In any event it is the ATC.
« Last Edit: April 19, 2013, 06:57:15 AM by jumptrout51 »
Take a Kid fishing.

Offline alimunib83

  • Technician
  • Member Since: Mar 2013
  • Posts: 10
  • Country: us
Anyone can tell me how to become a technician member on this forum

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9423
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Hope you find our site helpful.

Offline haroldsappliance

  • Technician
  • Member Since: Nov 2011
  • Posts: 616
  • Country: us
    • Appliance repair
I had a couple where I disconnected,then reconnected the ATC and they are still working.
In any event it is the ATC.

Same here, never a call back!

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 1490
  • Country: us
Same here too.Disconnected plastic tube blew through it back to the tub and never had a call back.Even own one and it happen to me.Stock the part though.And i know of two different part numbers as there seems to be only two for different models that i know of.And stock both.

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 1490
  • Country: us
Found this on appliance parts pro site.

 

Maytag top load Washer is still full of water at end of cycle

Started by 123123123

Replies: 7
Views: 4968
Last post April 22, 2009, 01:28:56 PM
by JWWebster
Maytag washer mah4000aww spin cycle

Started by evo100

Replies: 1
Views: 3250
Last post December 25, 2007, 09:41:02 PM
by AJ
Maytag Washer - Fills with water, then does nothing...

Started by AJ

Replies: 7
Views: 9688
Last post February 21, 2008, 05:34:00 PM
by AJ
Maytag washer-- got agitation, no spin in spin cycle

Started by PB3

Replies: 13
Views: 12526
Last post March 28, 2008, 09:18:30 AM
by PB3
GE Front Load Washer Noisy During Spin Cycle

Started by TechnicianBrian

Replies: 0
Views: 6972
Last post August 25, 2008, 07:01:33 AM
by TechnicianBrian
Roper Washer - On Spin cycle will make load buzzing noise, won't spin

Started by kbrettm1977

Replies: 2
Views: 9086
Last post December 10, 2008, 06:55:27 PM
by JWWebster