Author Topic: GE Service Bulletin Feb. 2013 Freezer drawer not closing or sealing  (Read 1102 times)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 10346
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Models:
ZIC30GNZ
ZIC30GND
ZIK30GNZ
ZIW30GNZ

Serial Range:
AV070000 AA084999

Solution:
The following parts are needed to direct harvested ice towards the front of the ice bucket, reducing the potential for ice to spill over the back of the freezer drawer during operation.

WR29X10085 Stripper IM
WR29X10054 IM Guardrail

Instructions:
1. Remove the IM from the FZ compartment.
2. Remove the ice deflector from the IM by removing the Philips head screw from the attachment tab.
3. Remove the factory installed stripper from the IM
4. Install the new stripper WR29X10085 and Guardrail WR29X10054 on the IM.
5. Reinstall the IM into the FZ Compartment.

Using bitcoin is more fun with friends! Earn $10 of free bitcoin!
https://www.coinbase.com/join/appliancejunk

If you want to learn more about bitcoin I highly recommend reading
Bitcoin For Dummies; 1st edition (March 21, 2016)

 

R-107 2008 Double Drawer Whirlpool Refrigerator / Freezer Under Counter Service Manual

Started by AJ

Replies: 0
Views: 3646
Last post August 20, 2009, 12:55:32 PM
by AJ
Jenn-Air Refrigerator, Freezer Drawer won't Close

Started by TechnicianBrian

Replies: 0
Views: 5648
Last post August 18, 2008, 06:54:39 AM
by TechnicianBrian
L2006-028 Samsung 2 Door 2 Drawer SxS Refrigerator Service Manual

Started by AJ

Replies: 0
Views: 3866
Last post August 20, 2009, 01:05:28 PM
by AJ
GE Refrigerator Bottom Freezer with Ice & Water in Door Service Manual

Started by AJ

Replies: 0
Views: 3028
Last post September 12, 2011, 06:38:20 AM
by AJ
Samsung Bottom-Mounted Freezer Refrigerator Repair Service Manual

Started by AJ

Replies: 0
Views: 3403
Last post October 06, 2011, 10:07:57 PM
by AJ
Side by side freezer door not closing right

Started by gdlongmd

Replies: 2
Views: 1884
Last post October 12, 2011, 09:36:51 AM
by JWWebster