Forum > Washer Repair

top loader GE/INTERMITTENT

<< < (2/2)

JWWebster:
Bypass the lidswitch and see if the problem is solved is what I would try, if it fixes it replace the switch.

stocpro47:
just a tip on the ge  lid switches        you can pry out the silicone,install a new 1 inch 200v reed switch that cost $1 on ebay and save a few bucks,with leads  soldered to reed before putting back in case and refill with new clear silcicone

stocpro47:
just a update on this older ge           i had the intermittent operation problem on a service call and new magnetic type lid switch did not correct problem!     a work in progress

Navigation

[0] Message Index

[*] Previous page

Go to full version