Author Topic: Whirlpool Washer fills but does not agitate, spin or drain - Model LSQ9564MQ0  (Read 6001 times)

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1527
  • Country: us
    • Buy me a beer through paypal
Quote
Soldering of wires in a washing machine is never a good idea because of the constant vibration.


I disagree. I have soldered hundreds of connections on many different appliances and have never had a callback.  On the other hand, I have had many crimped connections fail.  Now, if use a crimped connector for a high current application, I also solder it to avoid a callback.

Online fairbank56

  • Technician
  • Member Since: Aug 2012
  • Posts: 417
  • Country: us

  The problem with soldering a stranded wire crimp termination is that the solder will wick up into the strands of the wire under the insulation which has now created a small section of basically solid wire. The very reason we use stranded wire versus solid wire is because of it's flexibility. A wire termination at a motor is obviously going to be under a lot of vibration. Constant flexing of a solid wire versus a stranded wire is going to cause it to break a lot sooner than the stranded one. Sure, it may never fail, I'm just saying it's not a good idea. Soldering of terminations is ok as long as you properly secure the wire so that any vibration takes place beyond the secured point and not between the secured point and the termination. My experience is 37 years as an electronics technician with the federal government following rigid established training techniques and documented procedures for wiring terminations. The other problem here is that the average DIY'er doesn't know how to solder and doesn't possess the proper crimp tools to make a proper crimp connection anyway. I don't recommend soldering wire terminations on washing machines.

Eric

 

whirlpool washer model LXR9245EQ1- won't drain-slow spin

Started by fixmeplz

Replies: 2
Views: 7204
Last post January 16, 2008, 10:13:02 PM
by JWWebster
whirlpool washer model LSR9434PQ0 won't agitate or spin

Started by jhuffman

Replies: 4
Views: 3130
Last post May 28, 2012, 06:16:50 PM
by JWWebster
Whirlpool Washer doesn't spin, agitate, or drain?

Started by Tropix

Replies: 13
Views: 7707
Last post August 07, 2009, 11:10:39 PM
by JWWebster
Whirlpool washer can not agitate but can spin and drain water

Started by martintu

Replies: 3
Views: 2607
Last post May 14, 2010, 07:14:23 AM
by martintu
Whirlpool washer won't agitate/spin/drain

Started by Chris L

Replies: 7
Views: 8791
Last post July 24, 2010, 08:43:26 PM
by tgoods
Whirlpool washer does not agitate,spin or drain!

Started by real69ss

Replies: 23
Views: 6997
Last post August 08, 2012, 09:32:41 AM
by AJ