Author Topic: GE Topload won't Spin: Motor hums & Tub won't move either direction WDSR2080D2WW  (Read 3394 times)

Offline PARTech

  • Technician
  • Member Since: May 2009
  • Posts: 415
  • Country: us
    • Buy me a beer through paypal
    • Panhandle Appliance LLC
JW, every GE washer I've serviced bottoms out the suspension rods when fully loaded with water. This is normal. Check to make sure the bottom panel has not been bent upward or the top frame has not bent downward. I have seen both of these conditions causing the motor pulley/flywheel/belt to drag on the 'floor' of the unit.

I've seen the same thing, can't count the number of calls where the fix was either to stomp on the bottom plate (yes you can fit your foot back in there on both sides) or replace the front apron brace.
Serving North Idaho

 

Neptune TL pulley on bottom of tub will not turn in spin direction, motor OK

Started by jimtea

Replies: 4
Views: 1585
Last post July 30, 2009, 04:59:06 AM
by Repair-man
Maytag Centennial TL Washer won't Drain/Spin Motor Hums

Started by rockinrobin

Replies: 4
Views: 6221
Last post March 24, 2012, 10:00:20 AM
by RegUS_PatOff
Whirlpool Topload LSQ9610JQ0 won't Spin (Motor makes a humming/buzzing noise)

Started by rockinrobin

Replies: 4
Views: 1357
Last post June 13, 2013, 10:56:12 AM
by JWWebster
maytag noisy when agitating noise chenges with direction spin quiet

Started by funbiz99

Replies: 9
Views: 3899
Last post March 03, 2008, 08:07:48 PM
by JWWebster
Doesn't agitate or spin - Motor rotates too quickly and creates buring smell

Started by Bowhunter

Replies: 8
Views: 3937
Last post February 24, 2009, 06:10:14 PM
by AJ
GE topload, no transmission, reversing dc motor

Started by BrntToast

Replies: 0
Views: 1349
Last post June 24, 2009, 11:01:26 PM
by BrntToast