Author Topic: Samsung dryer DV316BEW/XAA  (Read 782 times)

Offline Patricio

  • Technician
  • Member Since: Aug 2011
  • Posts: 405
  • Country: us
  • Tight Lines
Samsung dryer DV316BEW/XAA
« on: April 05, 2013, 10:51:47 AM »
Dryer would not run.  Found drum belt off pulley which had a loose bracket where mounting screw backed out.  Cleaned rollers, pulley wheel, lubed with graphite, & appliaed blue lock tight to bracket srew & tightened up.
After reassembling dryer, power button does not work although I can hear it click at button when depressed.  Dryer will turn on when start dial is turned, will run initially but shuts down displaying X0 (don't have key for symbol so I use X) which the error code is open themistor.  Thermistor has 11.8 Kohms @ about 73 degrees.
Again power button will not turn unit off or when unpluged & repluged in will not turn unit on.  Start dial will activate lights.
Any form of diagnostic procedure to test PCB's?
Great Old Fashion Hometown Service

Offline ohmslaw

  • Technician
  • Member Since: Mar 2013
  • Posts: 16
  • Country: us
Re: Samsung dryer DV316BEW/XAA
« Reply #1 on: April 05, 2013, 09:43:07 PM »
well if you are getting an open thermistor error and the thermistor is good. Check the wiring back to the pcb.. if it checks ok then you are probably looking at the pcb. Seems odd though that the pcb would happen to fail at the same time the belt slipped off ;-\

Offline Patricio

  • Technician
  • Member Since: Aug 2011
  • Posts: 405
  • Country: us
  • Tight Lines
Re: Samsung dryer DV316BEW/XAA
« Reply #2 on: April 05, 2013, 10:58:31 PM »
Ask Samsung owner what symptoms were before unit quit working.  Could not get clear answers.  My main question was did power on/off work before belt was chunked.  Could not get clear answer.  When I go back I need to concentrate on thermistor.  Something throwing the code in there.  Did not unplug PCB when pulling front panel.  Unplugged power cord, door switch, thermistor, etc. to perform continuity checks.  Something I may or may not have done when accessing belt & pulley.   Obviously I am going to have to make a call back & double-triple check my work.  I never get in a hurry, take my time to get it right.  PCB boards can be confusing at times.  Again main question is "why does not power button turn machine on or off like all the other Samsungs do".  Thanks for you feedback.  will keep you updated.    Patricio
Great Old Fashion Hometown Service

 

ABS-L2006-002 Samsung Frontier Dryer Service Repair Manual

Started by AJ

Replies: 0
Views: 2685
Last post August 17, 2009, 01:00:30 PM
by AJ
dv316LES/Xaa Samsung Dryer side venting

Started by Leonard707

Replies: 0
Views: 1995
Last post January 04, 2010, 01:14:22 AM
by Leonard707
DV218AEW/XAA Samsung Dryer no heat

Started by ddavis263

Replies: 2
Views: 10709
Last post January 18, 2011, 08:40:41 PM
by ddavis263
samsung front loader dryer

Started by pallanesfour

Replies: 3
Views: 4484
Last post June 16, 2011, 07:10:08 PM
by pallanesfour
Samsung dryer shuts off after four minutes o

Started by krazytech

Replies: 8
Views: 8538
Last post August 05, 2011, 05:32:51 PM
by krazytech
Samsung dryer

Started by app1

Replies: 4
Views: 3245
Last post August 24, 2011, 07:30:35 AM
by AJ