Author Topic: Maytag MAVT754EWW Grinding noise during Agitation  (Read 2639 times)

Online rockinrobin

  • Technician
  • Member Since: Sep 2011
  • Posts: 293
  • Country: us
    • Buy me a beer through paypal
    • Ransom Mobile Appliance Repair Service
Maytag MAVT754EWW Grinding noise during Agitation
« on: March 30, 2013, 05:48:26 PM »
I have a Maytag Topload Washer that makes a grinding noise when it Agitates and I need the Service Manual (if available) to help with troubleshooting.
The Lower Agitator isn't stripped, therefore could it be the Belt or Transmission? :-\
 :thanks:

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9425
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Maytag MAVT754EWW Grinding noise during Agitation
« Reply #1 on: March 30, 2013, 05:58:20 PM »
Quote
The Lower Agitator isn't stripped
Could be just the top half of the agitator is shot.
Unlike some other washers the agitator in your model is non repairable and is replaced as a assembly, part # 22004042.

I did not see a service manual for that model. You could try to run the washer with the agitator removed and see if the noise stops. If so then you know the noise is coming from the agitator.

MAVT754EWW Diagrams

Hope that helps,
Hope you find our site helpful.

Online rockinrobin

  • Technician
  • Member Since: Sep 2011
  • Posts: 293
  • Country: us
    • Buy me a beer through paypal
    • Ransom Mobile Appliance Repair Service
Re: Maytag MAVT754EWW Grinding noise during Agitation
« Reply #2 on: March 30, 2013, 08:44:08 PM »
Quote
The Lower Agitator isn't stripped
Could be just the top half of the agitator is shot.
Unlike some other washers the agitator in your model is non repairable and is replaced as a assembly, part # 22004042.

I did not see a service manual for that model. You could try to run the washer with the agitator removed and see if the noise stops. If so then you know the noise is coming from the agitator.

MAVT754EWW Diagrams

Hope that helps,

AJ,

I removed the Agitator and it's still making the Grinding Noise during Agitation.
Therefore, could it be the Thrust Bearing (AP4009132), Drive Belt or Transmission (AP4373431)?

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9425
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Maytag MAVT754EWW Grinding noise during Agitation
« Reply #3 on: March 30, 2013, 08:49:41 PM »
Check the pump to see if anything got caught in it.
Hope you find our site helpful.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9425
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Maytag MAVT754EWW Grinding noise during Agitation
« Reply #4 on: March 30, 2013, 08:52:20 PM »
Also turn the pump pulley by hand in both directions to see if it's ruff feeling or noisy.

I replace a lot of these water pumps for noise problems, part # 35-6780
Hope you find our site helpful.

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 953
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: Maytag MAVT754EWW Grinding noise during Agitation
« Reply #5 on: March 30, 2013, 08:55:51 PM »
This may be a bad transmission.
« Last Edit: March 30, 2013, 08:59:34 PM by bigbuck »

Offline Bailey

  • Technician
  • Member Since: Dec 2011
  • Posts: 650
  • Country: us
Re: Maytag MAVT754EWW Grinding noise during Agitation
« Reply #6 on: March 31, 2013, 12:20:18 AM »
I agree with AJ. Check the pump first. They are a well known problem. Look at the pulley on the pump.If you see a shiny piece of corrugated metal sticking up between the pulley and the pump base replace the pump.

 

Maytag LA8650 Washer - Grinding/Scraping/Rattle Noise During Spin Cycle

Started by Carol2

Replies: 17
Views: 10208
Last post April 02, 2009, 05:40:54 PM
by Carol2
Maytag washer grinding/wire dragging on metal noise but inner tub won't come out

Started by markq

Replies: 2
Views: 3730
Last post February 20, 2009, 10:40:39 AM
by markq
whirlpool lsc9000pw0 grinding noise during high agitation

Started by ActionFigure

Replies: 2
Views: 1199
Last post November 25, 2011, 08:04:22 PM
by jbtools
Grinding noise on Maytag MAH6700AWW

Started by mcinvalek

Replies: 1
Views: 477
Last post September 15, 2013, 11:00:10 AM
by AJ
Maytag SAV3655 noise during spin and agitation

Started by spinne1

Replies: 1
Views: 414
Last post November 14, 2013, 07:48:20 PM
by Bailey
Grinding noise during Agitation MAV6200AWW

Started by digitalplumber

Replies: 7
Views: 468
Last post March 23, 2014, 08:49:04 AM
by Wilson13