Forum > Range, Oven & Cooktop Repair

Hotpoint Range no Bake or Broil

(1/1)

TechnicianBrian:

Model #RB756GT1WW, the surface unit of this range worked fine, but none of the oven functions were working. Both oven elements are controlled by the electronic oven control (EOC) on this unit so I used my meter to verify I had proper power to the board, which it did, and I verified continuity at the board through the wire harness to both elements. Then out of habit, I inspected the board for damage but found none so if there is power to the board, but nothing out to the elements, the board must be bad. Replaced the oven control and now its working again.

Model RB756GT1WW

Navigation

[0] Message Index

Go to full version