Author Topic: Maytag Topload won't Agitate/Spin on 1 Cycle SAV515DEWW S/N 14  (Read 843 times)

Offline rockinrobin

  • Technician
  • Member Since: Sep 2011
  • Posts: 296
  • Country: us
    • Buy me a beer through paypal
    • Ransom Mobile Appliance Repair Service
I have 2 problems on a Maytag Topload Legacy Series Washer:
1) When I wash a heavy load (such as towels), I notice they are dripping wet (not spun dry) after the cycle completes. Could it be the Belt, Thrust Pulley or something else? :-\
2) The Washer won't Agitate or Spin on one Cycle and the Timer won't advance (Timer makes a buzzing/humming noise). Could it be the Timer or 2-Speed Drive Motor? :-\

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Maytag Topload won't Agitate/Spin on 1 Cycle SAV515DEWW S/N 14
« Reply #1 on: March 28, 2013, 02:44:38 PM »
yOU MAY HAVE AN INTERMITTENT LID SWITCH.
bYPASS THE LID SWITCH FOR TESTING.
iF YOU STILL HAVE A PROBLEM YOUR TIMER MAY BE AT FAULT.
Take a Kid fishing.

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Maytag Topload won't Agitate/Spin on 1 Cycle SAV515DEWW S/N 14
« Reply #2 on: March 28, 2013, 02:45:18 PM »
OOPS!! caps button was stuck,sorry.
Take a Kid fishing.

Offline rockinrobin

  • Technician
  • Member Since: Sep 2011
  • Posts: 296
  • Country: us
    • Buy me a beer through paypal
    • Ransom Mobile Appliance Repair Service
I replaced the Timer and it fixed both problems.
 :thanks:

 

Maytag Topload LAT9420AAW S/N 10 won't Fill/Spin on any Cycle

Started by rockinrobin

Replies: 4
Views: 845
Last post April 04, 2013, 07:53:33 PM
by rockinrobin
Maytag washer mah4000aww spin cycle

Started by evo100

Replies: 1
Views: 3262
Last post December 25, 2007, 09:41:02 PM
by AJ
Maytag Spin Cycle

Started by Camarocam

Replies: 1
Views: 4106
Last post February 19, 2008, 11:07:58 AM
by AJ
Maytag washer-- got agitation, no spin in spin cycle

Started by PB3

Replies: 13
Views: 12575
Last post March 28, 2008, 09:18:30 AM
by PB3
Maytag Neptune MAH4000AWW burning smell during spin cycle.

Started by ksujason

Replies: 15
Views: 18508
Last post September 14, 2008, 11:46:31 PM
by Repair-man
Maytag agitates during the spin cycle

Started by rsteve12

Replies: 6
Views: 3988
Last post October 25, 2008, 08:35:11 PM
by JWWebster