Author Topic: Kitchenaid KUDP02CRBS2 parts problem  (Read 511 times)

Offline boss96

  • Technician
  • Member Since: Aug 2012
  • Posts: 25
Kitchenaid KUDP02CRBS2 parts problem
« on: March 12, 2013, 06:26:47 PM »
I'm trying to replace the sump ass'y on this unit. The original part number is 8572617 which is subbed by W10237169. When I picked up the sub number at the distributor I discovered that is simply is not the right part, the motor is smaller and uses a smaller wire connector than the original one does. I brought it back and all the ones they have in stock are the same.
Is there something I am missing here?
The original sump has a pretty big motor with a solenoid or capacitor attached to it. There is also a pretty big hold in the housing for a thermistor (about 1 1/2 ") which the substitute unit does not have in addition to a smaller motor with wrong elec. connectors.
Any ideas? Or is my distributor at fault?

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 947
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: Kitchenaid KUDP02CRBS2 parts problem
« Reply #1 on: March 12, 2013, 07:33:08 PM »
Correct part number, they were having problem around 6 months ago, I would say its a mfg. problem.

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 947
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: Kitchenaid KUDP02CRBS2 parts problem
« Reply #2 on: March 12, 2013, 07:37:30 PM »
They have been putting wrong motors in wrong boxes sometimes, I picked 1 up a local parts warehouse about 5 to 6 months ago , suppose to have small hole, & it was large hole pump assy. Whirlpool is having problems.
« Last Edit: March 12, 2013, 07:44:20 PM by bigbuck »

 

KitchenAid Ancient (1987) dishwasher manifold/receiver problem

Started by stevebass

Replies: 2
Views: 1445
Last post April 04, 2010, 12:43:49 PM
by stevebass
Chopper Assembly protector/cover stuck? Kitchenaid Dishwasher KUDS01IJWH0

Started by skip

Replies: 4
Views: 4147
Last post January 26, 2008, 04:48:06 PM
by RegUS_PatOff
Kenmore dishwasher motor problem

Started by lgmccoy1

Replies: 3
Views: 6119
Last post February 22, 2008, 11:06:24 AM
by RegUS_PatOff
KAD-9 KitchenAid Dishwasher Drawer

Started by whirlpooltech

Replies: 0
Views: 1412
Last post March 17, 2008, 05:54:39 PM
by whirlpooltech
Intermittent Problem with Maytag Dishwasher

Started by Firenut

Replies: 2
Views: 3916
Last post March 29, 2008, 12:43:53 PM
by JWWebster
Kitchenaid Dishwasher Door Drops when Opened

Started by TechnicianBrian

Replies: 10
Views: 47898
Last post July 18, 2010, 11:00:24 PM
by JWWebster