Author Topic: Maytag FAV6800 - uC error code  (Read 711 times)

Offline fej70

  • VIP Member
  • Member Since: Apr 2015
  • Posts: 1
Maytag FAV6800 - uC error code
« on: April 28, 2015, 09:09:47 AM »
I have a Maytag FAV6800 washer, 15 series.  For a while, I have been getting dC/uC error codes and hearing machine bang around and squeak due to unbalanced condition.  Looked through several threads on this topic, and figured the clutch assembly was the problem.  I removed the clutch assembly and planned to clean, but it was damaged.  I purchased a new clutch assembly and installed it last night.  Started the machine back now runs through most of its' cycle great...purrs like a kitten with no banging or squeaking.  However, it gets down to around 10 minutes left in the cycle, and the uC error code appears, along with three audible beeps, and the machine stops.  If I open the top, manually rebalance the load, and attempt to start the machine again (like I could before when I was getting dC error codes), it will not re-start...keeps giving me the three audible beeps.  I can shut down the machine completely, start a new cycle, and it will take off again like new, only to stop again at around 10 minutes left in the cycle with the uC error code.  Any ideas as to what the problem is now?  I have read posts indicating that the tub displacement sensor may also be the problem, but I'd like to know that for sure before I purchase one to try on this machine.  Any help would be greatly appreciated.  Frank

Offline mz3own

  • Technician
  • Member Since: Apr 2014
  • Posts: 1108
  • Country: us
    • Buy me a beer through paypal
Re: Maytag FAV6800 - uC error code
« Reply #1 on: April 28, 2015, 04:47:09 PM »
here is a link on how to test the sensor.


Maytag Washer F01 Error Code

Started by TechnicianBrian

Replies: 0
Views: 10696
Last post June 17, 2008, 07:13:27 AM
by TechnicianBrian
Maytag Neptune TL Washer UC Error Code

Started by TechnicianBrian

Replies: 0
Views: 28089
Last post October 14, 2008, 06:38:41 AM
by TechnicianBrian
My Maytag gives the error code "do" and the door is closed.

Started by briancalhoun

Replies: 2
Views: 2472
Last post August 15, 2009, 12:14:54 PM
by briancalhoun
HR error code Maytag Washer

Started by gkofc

Replies: 0
Views: 3392
Last post January 14, 2010, 09:25:13 AM
by gkofc
Maytag Neptune uC error code

Started by salida

Replies: 17
Views: 11598
Last post October 07, 2010, 10:36:31 AM
by dh1200s
Maytag Bravos H-92 error code

Started by Blaiser

Replies: 2
Views: 137
Last post April 09, 2016, 01:37:36 PM
by Blaiser