Author Topic: Frigidaire Range no Bake or Broil  (Read 2753 times)

Offline TechnicianBrian

  • Technician
  • Member Since: Dec 2007
  • Posts: 390
  • Country: us
    • TechnicianBrian.com
Frigidaire Range no Bake or Broil
« on: May 13, 2008, 09:48:19 PM »

Model #FED367DSA, the surface units of this range worked well, but the oven would not operate in the bake or broil modes. After removing the control panel and accessing the electrical connections, I found 120vac on both the L1 and L2 input terminals so I knew the source voltage was OK. But when I turned on each element, I was getting 120vac from the L1 outputs, but nothing from the L2 output. Just as a double check, I also did a resistance check to verify both elements were still intact and they checked also checked OK. I decided to open the control board and take a look inside and found a nice burn mark on the back side. I replaced the control board and now the oven heats properly again.


FED367DSA
« Last Edit: May 13, 2008, 09:49:36 PM by AJ »

donate
$1, $2, $5, $10, $20, $50
 

Frigidaire Range No Bake or Broil

Started by app1

Replies: 5
Views: 2141
Last post July 25, 2012, 07:49:16 AM
by app1
Hotpoint Range no Bake or Broil

Started by TechnicianBrian

Replies: 0
Views: 2048
Last post May 18, 2008, 07:42:18 AM
by TechnicianBrian
Maytag PGR5710BDQ Gas Range, Flashing lock light when bake or broil is pressed

Started by straycatt

Replies: 4
Views: 5283
Last post June 14, 2008, 11:19:00 AM
by straycatt
Kenmore Electric Range-No Bake or Broil

Started by Gobbyparts

Replies: 10
Views: 6427
Last post February 23, 2009, 04:56:02 PM
by RegUS_PatOff
74008064 Maytag Jenn Air Bake Broil Oven Range Ignitor

Started by AJ

Replies: 0
Views: 4539
Last post April 09, 2009, 08:49:06 PM
by AJ
whirlpool gas range bake and broil not lighting

Started by mike k

Replies: 6
Views: 4605
Last post November 22, 2010, 01:51:03 AM
by RegUS_PatOff