Author Topic: Hotpoint Range no Bake or Broil  (Read 2450 times)

Offline TechnicianBrian

  • Technician
  • Member Since: Dec 2007
  • Posts: 390
  • Country: us
    • TechnicianBrian.com
Hotpoint Range no Bake or Broil
« on: May 18, 2008, 07:42:18 AM »

Model #RB756GT1WW, the surface unit of this range worked fine, but none of the oven functions were working. Both oven elements are controlled by the electronic oven control (EOC) on this unit so I used my meter to verify I had proper power to the board, which it did, and I verified continuity at the board through the wire harness to both elements. Then out of habit, I inspected the board for damage but found none so if there is power to the board, but nothing out to the elements, the board must be bad. Replaced the oven control and now its working again.


Model RB756GT1WW
« Last Edit: May 18, 2008, 07:58:36 AM by AJ »

 

Hotpoint (GE) Range-No Bake, No Broil

Started by JLM

Replies: 10
Views: 2428
Last post April 22, 2012, 05:20:32 PM
by JWWebster
Frigidaire Range no Bake or Broil

Started by TechnicianBrian

Replies: 0
Views: 3266
Last post May 13, 2008, 09:48:19 PM
by TechnicianBrian
Maytag PGR5710BDQ Gas Range, Flashing lock light when bake or broil is pressed

Started by straycatt

Replies: 4
Views: 5892
Last post June 14, 2008, 11:19:00 AM
by straycatt
Kenmore Electric Range-No Bake or Broil

Started by Gobbyparts

Replies: 10
Views: 7330
Last post February 23, 2009, 04:56:02 PM
by RegUS_PatOff
74008064 Maytag Jenn Air Bake Broil Oven Range Ignitor

Started by AJ

Replies: 0
Views: 5054
Last post April 09, 2009, 08:49:06 PM
by AJ
whirlpool gas range bake and broil not lighting

Started by mike k

Replies: 6
Views: 5222
Last post November 22, 2010, 01:51:03 AM
by RegUS_PatOff