Author Topic: Kitchen aid completely dead  (Read 598 times)

Offline Rick32k

  • Technician
  • Member Since: May 2012
  • Posts: 141
  • Country: us
Kitchen aid completely dead
« on: February 27, 2013, 08:25:37 PM »
This is a stainless Steele unit that has absolutely no power at the control board. I went and checked it out it has power going to I. And when I checked the thermal fuse On the control board It had no continuity. W10258275 so I'm gonna replace the part. Any other suggestions I might have overlooked?

Online AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 8931
  • Country: us
    • Buy me a beer through paypal
    • ApplianceJunk.com - Appliance Repair Help
Re: Kitchen aid completely dead
« Reply #1 on: February 27, 2013, 08:33:35 PM »
Just make sure to follow the instructions and replace the two leads that are included with the new thermal fuse.
Hope you find our site helpful.

Offline Rick32k

  • Technician
  • Member Since: May 2012
  • Posts: 141
  • Country: us
Re: Kitchen aid completely dead
« Reply #2 on: February 28, 2013, 01:15:55 AM »
Can't reuse the ones o. There now?

Online AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 8931
  • Country: us
    • Buy me a beer through paypal
    • ApplianceJunk.com - Appliance Repair Help
Re: Kitchen aid completely dead
« Reply #3 on: February 28, 2013, 05:59:41 AM »
They send new wire connections because the old ones could be creating a bad connection and making the thermal fuse blow.
Install the new wire connectors that are in the kit with the new thermal fuse and you won't have any more problems with the thermal fuse.
Hope you find our site helpful.

Offline haroldsappliance

  • Technician
  • Member Since: Nov 2011
  • Posts: 612
  • Country: us
    • Appliance repair
Re: Kitchen aid completely dead
« Reply #4 on: February 28, 2013, 06:02:24 AM »
They send new wire connections because the old ones could be creating a bad connection and making the thermal fuse blow.
Install the new wire connectors that are in the kit with the new thermal fuse and you won't have any more problems with the thermal fuse.
Good advice! O0

 

KUDS01FLSS1 Kitchen Aid Dishwasher Dead Again!

Started by Bob

Replies: 1
Views: 1631
Last post December 19, 2011, 10:41:25 AM
by AJ
LG LDF7920ST Dishwasher is completely dead

Started by mtl4

Replies: 3
Views: 576
Last post August 22, 2013, 05:55:44 PM
by mtl4
Whirlpool Dishwasher GU1200XTLQ1 Dead, clean light blinks.

Started by barb

Replies: 2
Views: 5095
Last post August 11, 2007, 08:05:47 AM
by barb
Dead whirlpool dishwasher

Started by galen

Replies: 3
Views: 2315
Last post September 09, 2007, 08:10:00 PM
by Pegi
Whirlpool Dishwasher GU2400XTPS6 dead?

Started by baxleyk1

Replies: 3
Views: 3848
Last post October 22, 2007, 10:15:40 PM
by rickgburton
Whirlpool Dishwasher - Dead!

Started by AJ

Replies: 0
Views: 2426
Last post January 18, 2008, 10:01:10 PM
by AJ