Author Topic: GE Hydro Wave Washer -Mode Shifter Ghetto Repair  (Read 8106 times)

Offline goodsusedappliance

  • Technician
  • Member Since: Jan 2012
  • Posts: 6
GE Hydro Wave Washer -Mode Shifter Ghetto Repair
« on: February 25, 2013, 04:08:42 PM »
I opened up the solenoid on the mode shifter WH38X10017.  There is a thermal cut-off wired on to it.  I bi-passed it and put it back together and everything works fine.  Is this a bad idea?

Offline domain

  • Technician
  • Member Since: Nov 2012
  • Posts: 1078
  • Country: us
Re: GE Hydro Wave Washer -Mode Shifter Ghetto Repair
« Reply #1 on: February 25, 2013, 05:08:59 PM »
WHOA! Pics? :D

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: GE Hydro Wave Washer -Mode Shifter Ghetto Repair
« Reply #2 on: February 25, 2013, 05:41:49 PM »
Cool. Ain't no bad idea long as you put a bullet fuse in there or the equivalent. I would love to see that too. How did you get into it?
The older washers would work fine UNLESS a person added a garment after that solenoid was initiated. Instead of being activated for seconds it stayed on for minutes thus it would blow the solenoid. This is the first I have heard of a limit within the circuitry.
« Last Edit: February 25, 2013, 05:46:24 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline LowSL2

  • Technician
  • Member Since: Dec 2011
  • Posts: 914
  • Country: us
  • Fletch F. Fletch
    • Buy me a beer through paypal
Re: Re: GE Hydro Wave Washer -Mode Shifter Ghetto Repair
« Reply #3 on: February 25, 2013, 08:31:28 PM »
WHOA! Pics? :D

I need to see this too. I'm tempted to tear apart the one in my truck...

Sent from my DROID BIONIC using Tapatalk 2

LowSL2
15 Years of Professional Appliance Repair Experience

Offline fairbank56

  • Technician
  • Member Since: Aug 2012
  • Posts: 417
  • Country: us
Re: GE Hydro Wave Washer -Mode Shifter Ghetto Repair
« Reply #4 on: February 26, 2013, 08:37:15 AM »

  The coil cover is riveted on so you just have to drill them out, remove the internal fuse and solder the wires directly. Use heat shrink to insulate. You should install an external fuse holder with 2 amp fuse. Use screws and nuts to reinstall the coil cover. There was a web page with pic's that someone did but I can't find it now.

Eric

Offline goodsusedappliance

  • Technician
  • Member Since: Jan 2012
  • Posts: 6
Re: GE Hydro Wave Washer -Mode Shifter Ghetto Repair
« Reply #5 on: February 26, 2013, 09:39:34 AM »
Sorry I didn't take pictures.  I pulled out the tub & flipped it. I removed the drive pulley.  I drilled out the rivets holding the solenoid on.  I snipped the red & yellow wires to pull it through. (leave plenty to re-connect)  I removed the plastic housing holding the windings from the metal housing.  I removed some of the tape holding the wires down.  I found
http://www.aupo.com/products_detail/&productId=1dc42fb5-c9a6-4da5-ae4c-941072324fa5&comp_stats=comp-FrontProducts_list01-004.html
this thermal fuse wired between the winding & the Yellow wire. I cut the fuse out and soldered the wire straight to the yellow wire. I used high temp fiberglass tape to keep the wires in place. 

The fuse was rated at 130C witch is 266F.  I'm not sure where to find a fuse so small. I was thinking of trying to burn it up by leaving the door open... just to see what happens. 


Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1188
Re: GE Hydro Wave Washer -Mode Shifter Ghetto Repair
« Reply #6 on: February 26, 2013, 02:15:41 PM »
Technicians do not have bad ideas. Just some ideas, that need a little modifying. After all, we make the things engineers design work. How long did the repair take you, and could you do it in there home without taking the shifter back to the shop?

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: GE Hydro Wave Washer -Mode Shifter Ghetto Repair
« Reply #7 on: February 26, 2013, 07:21:27 PM »
Cool
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1527
  • Country: us
    • Buy me a beer through paypal
Re: GE Hydro Wave Washer -Mode Shifter Ghetto Repair
« Reply #8 on: March 17, 2013, 06:33:27 PM »
I just changed a mode shifter out so I opened it up.  It has an A8-5A-F.  It's rated a little hotter than yours, 150C. I couldn't find it for sale so I crossed to an NTE8035. It's $1.25 plus shipping at Mouser. The 130C fuse crosses to NTE8020, same price. The windings look good, no burning, 65 ohms.


I haven't decided if I'm going to repair it or not.  It's only the second mode shifter I've replaced.  I think they're pretty reliable as long as you don't leave the lid up on the older ones. I wouldn't repair one without a new fuse, bypassing safety devices is never a good idea.

Offline domain

  • Technician
  • Member Since: Nov 2012
  • Posts: 1078
  • Country: us
Re: GE Hydro Wave Washer -Mode Shifter Ghetto Repair
« Reply #9 on: March 17, 2013, 06:34:58 PM »
may i ask what leaving the lid up causes to the mode shifter? thank you

 

GE hydro wave washer

Started by RANDY GREEN

Replies: 1
Views: 485
Last post May 18, 2014, 03:47:31 PM
by olyteddy
Repair Guide: Whirlpool Direct Drive Washer - No agitate or spin

Started by AJ

Replies: 13
Views: 29616
Last post January 02, 2009, 01:09:38 PM
by AJ
neptune washer- machine control board repair

Started by inot66

Replies: 7
Views: 4030
Last post July 13, 2013, 10:15:59 PM
by def
LG WM2075 Washer Service Repair Manual

Started by apptech

Replies: 0
Views: 5610
Last post March 23, 2008, 04:32:55 PM
by apptech
LG WM2042 Washer Service Repair Manual

Started by apptech

Replies: 0
Views: 4417
Last post March 23, 2008, 04:32:56 PM
by apptech
LG WM2032 Washer Service Repair Manual

Started by apptech

Replies: 0
Views: 8320
Last post March 23, 2008, 04:32:56 PM
by apptech